NKN2WSJR-73-6R8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are a popular and widely used electrical component in many applications which require electrical current limiting or electrical signal attenuation. The NKN2WSJR-73-6R8 is a general purpose through-hole resistor that can be used in many different applications. This resistor is made from an Epoxy molded case which has been filled with a ceramic material. The resistor has two leads that are soldered onto the printed circuit board.

One of the most common applications for the NKN2WSJR-73-6R8 is as a pull-up resistor in digital circuits. This resistor is used to keep a digital signal from going low when the circuit is inactive. The resistor is connected between a supply voltage and the digital signal line, so that when the line is inactive, the current that is drawn is limited. This prevents any unwanted currents from flowing through the gate and damaging the components.

The NKN2WSJR-73-6R8 can also be used as a current-limiting resistor in high-power circuits. A current-limiting resistor is used to control the amount of current flowing through the circuit. By limiting the current flowing through the circuit, it is possible to protect delicate components from being damaged by excessive currents. In addition, the current-limiting resistor also serves to protect the circuit from short-circuiting due to over-currents.

The NKN2WSJR-73-6R8 can also be used as a voltage divider in circuits that require voltage control. A voltage divider is essentially a network of two resistors connected in series with a third resistor (the NKN2WSJR-73-6R8) connected between the two. By varying the voltage across the two resistors, it is possible to generate a voltage of whatever value is desired.

Another application for the NKN2WSJR-73-6R8 is in bypass capacitors. A bypass capacitor is used to reduce the effects of noise and unwanted signals in a circuit. Bypass capacitors are connected between two points and, when AC signals pass through, some of the high frequency energy is “blocked” while the lower frequency energy passes through.

The NKN2WSJR-73-6R8 is also used as an offset resistor in feedback circuits. The offset resistor is used to offset the signal at the input of the circuit and ensure that the signal is within the necessary range before being fed to the rest of the circuit. This helps to eliminate unwanted noise and interference from the input signal.

Finally, the NKN2WSJR-73-6R8 is also used in voltage regulator units as a current sense resistor. The resistor is connected in series with the output of the voltage regulator and is used to sense the current drawn from the output. This enables the voltage regulator to adjust its output in order to maintain a stable voltage.

The NKN2WSJR-73-6R8 is a versatile and reliable through-hole resistor, which can be used for many different applications. Its principal use is as a current limiting or voltage dividing resistor, but it can also be used in a number of other applications. This makes the NKN2WSJR-73-6R8 a great choice for many different applications.

The specific data is subject to PDF, and the above content is for reference