NKN3WSJR-73-0R75

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through-hole resistors are one of the most basic and widely used forms of linear resistors. They are available in a variety of shapes and sizes and serve many different applications, and can be found in almost every circuit. The standard resistor configuration consists of metal oxide ceramic disks that are coated with a resistive layer which is typically made of either carbon or metal. NKN3WSJR-73-0R75 is a two-pin through-hole resistor that is widely used in the electronics industry. In this article, we will discuss the application and operation of the NKN3WSJR-73-0R75, as well as its advantages and disadvantages.

The NKN3WSJR-73-0R75 is a two-pin through-hole resistor that is used in power applications that require a very low resistance value. It is designed to operate at a voltage range of up to 250V AC or DC, and can handle up to 2.5 amps of current. The resistor is made of metal oxide ceramic, and is coated with a carbon or metal resistive layer that provides a high degree of flexibility and accuracy.

The NKN3WSJR-73-0R75 is most commonly used in power supplies, automotive and industrial applications, and AC circuits. Its small size and low resistance values allow it to be placed directly before a component or circuit, and its resistance to heat and short-circuits also makes it a viable choice for high-load applications. Additionally, the NKN3WSJR-73-0R75 can be used for surge protection, current limiting, and noise suppression.

The NKN3WSJR-73-0R75 works on Ohm’s law, which states that the voltage across a resistor is equal to the current through the resistor multiplied by its resistance. This law applies to all resistors, but is particularly important in terms of through-hole resistors because it allows for precise control of current and voltage. As current is applied to the resistor, a voltage drop is produced across the resistor, and this drop can be calculated using the resistance value.

One of the main advantages of the NKN3WSJR-73-0R75 is its ability to provide high current handling with minimal power waste. The small size of the resistor allows it to be placed close to the component or circuit, minimizing the amount of power wasted on the larger items in the circuit. Additionally, the resistor\'s low resistance value means that it can be used with components that require high current.

However, the NKN3WSJR-73-0R75 also has some disadvantages. The small size of the resistor makes it difficult to work with, and it can be easily damaged when installing or removing it. In addition, the resistor\'s small size and low resistance value limit its ability to protect components from surges and high current spikes.

In conclusion, the NKN3WSJR-73-0R75 is a two-pin through-hole resistor that is used for power applications that require a very low resistance value. It can handle up to 2.5 amps of current, and its small size and low resistance values allow it to be placed directly before components or circuits. Its resistance to heat and short-circuits also makes it a viable choice for high-load applications. Additionally, its ability to provide high current handling with minimal power waste is a definite advantage. Although there are some drawbacks to using the NKN3WSJR-73-0R75 resistor, its overall performance and flexibility make it an excellent choice for many applications.

The specific data is subject to PDF, and the above content is for reference