NKN400JR-73-4R7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are devices that are designed to provide electrical resistance to the flow of current through them. The resistance can be adjusted and/or configured for a specific application, depending on the resistor type. The NKN400JR-73-4R7 is a reliable Through Hole Resistor, and is widely used in many different applications.

The NKN400JR-73-4R7 is a four-terminal Through Hole Resistor with an angled pin array on the base of the resistor. It has a rated resistance value of 400ohms, and a range of tolerance of ±1%. It can be designed to dissipate internal power up to 500mW, which makes it an ideal choice for power management in many medium to high power applications.

This resistor uses a stable ceramic substrate, which allows it to operate at temperature ratings up to 155°C and has a good temperature coefficient. It also has a wide operating voltage range, from 0 - 50V, making it an excellent choice for many applications.

The NKN400JR-73-4R7 can be used in a variety of applications, such as power supplies, robotics, energy management systems, and medical technology. Due to the resistor\'s stable ceramic substrate, it can also be used in automotive electronics, where vibration and shock protection is important. In addition, it can also be used for audio signal applications, as it provides excellent noise suppression characteristics.

The working principle of the NKN400JR-73-4R7 is based on the passing of current through the resistor material. This induces a voltage drop across the resistor, which is proportional to the applied current. The resistance value is determined by the characteristics of the resistor material, such as the width and length of the resistor.

The NKN400JR-73-4R7 is designed with four terminals, which allows it to be configured for use in high power applications. The four terminals allow the resistor to be wired in series or parallel, depending on the design requirements. This allows the voltage and current to be adjusted in order to provide the proper resistance for the specific application.

The NKN400JR-73-4R7 is a highly reliable Through Hole Resistor that is widely used in many applications. With its four terminals, voltage and current range, and high temperature rating, it is an excellent choice for many power management, robotics, and audio signal applications.

The specific data is subject to PDF, and the above content is for reference