NKN5WSJR-73-2R7

Series:	NKN
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	2.7 Ohms
Tolerance:	±5%
Power (Watts):	5W
Composition:	Wirewound
Features:	Flame Retardant Coating, Non-Inductive, Safety
Temperature Coefficient:	--
Operating Temperature:	-40°C ~ 200°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.256" Dia x 0.689" L (6.50mm x 17.50mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction — The NKN5WSJR-73-2R7 Through Hole Resistors Through hole resistors, such as the NKN5WSJR-73-2R7 type, are one of the most common electronic components in use today. Through hole resistors are useful for controlling the current or voltage applied to an electronic circuit, and are most commonly used to reduce the circuit\'s sensitivity to noisy signals or electronic noise. As such, they are an important part of virtually all electronic circuits.Applications The NKN5WSJR-73-2R7 through hole resistor is a versatile component that can be used in a variety of applications. These components are typically used in analog and digital circuits where an accurate current or voltage control is needed. They are used in amplifier circuits, voltage regulators, and motor controllers, among others. They are also used in power supplies, audio amplifiers, and automotive systems.Working Principle The working principle of the NKN5WSJR-73-2R7 through hole resistor is relatively simple. It consists of a resistor mounted in a through-hole design. In a circuit diagram, the element is represented by a single line, or two lines connected at both ends. The resistor itself is composed of either metal or carbon material that has been heated to a high temperature. The amount of heat applied determines the resistance value of the resistor.When a current is applied to the component, the electrons flow through the metal or carbon material, and their movement is hindered by the resistance of the material. This process creates a voltage drop across the resistor, which is known as the resistance. The resistance value of the NKN5WSJR-73-2R7 through hole resistor can be adjusted by changing the temperature of the resistor, or by using a different material with a higher resistance.Conclusion Through hole resistors, and specifically the NKN5WSJR-73-2R7 type, are essential components in analog and digital circuits. They are used to control the current or voltage applied to an electronic circuit, and are most commonly used to reduce the circuit\'s sensitivity to noise. With their low cost and relative simplicity, through hole resistors are some of the most commonly used electronic components in use today.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description