NOMCT16031001BT1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays are used to provide complex voltage dividers and current barriers in a wide range of applications. The NOMCT 16031001BT1 devices are three-terminal networks with matched pairs of resistors in a single surface mount package. They provide a high voltage barrier between an input and output, and are ideal for voltage divider applications.

NOMCT 16031001BT1 Application Field

The NOMCT 16031001BT1 is a popular three-terminal resistor network, suited for a variety of potential uses in industrial, automotive, medical and consumer applications. Some of the most common applications include:

• Voltage Divider – The NOMCT 16031001BT1 can be used to produce a voltage divider for high-voltage applications. The voltage divider is needed in applications such as medical equipment, video surveillance, power management, or any other application where a large voltage difference needs to be maintained between the two output terminals.
• Current Barrier – The NOMCT 16031001BT1 can also be used to produce a current barrier, which is useful in circuit protection applications or to protect sensitive components. The current barrier is capable of providing short-circuit protection between two high-voltage connections, while still allowing low-level signals to pass.
• Protective Overload – The NOMCT 16031001BT1 can also be used to create a protective overload of a voltage or current source. When connected in series, the device can limit the current or voltage to prevent it from exceeding a specific level, while also allowing high peak signals to pass. This is often used in audio or video applications or medical equipment.
• Isolation – The NOMCT 16031001BT1 can be used to provide electrical isolation between two circuits, allowing the potential between them to remain relatively independent. This is useful in situations where maximum power transfer, or precise control of current flow, is necessary.

NOMCT 16031001BT1 Working Principle

The NOMCT 16031001BT1 utilizes a three-terminal network of matched resistors to provide a well-defined electrical barrier between various voltages and currents. The resistor network is capable of handling up to 30V and up to 1A of current, which is sufficient for a variety of power management applications.

The actual working principle of the NOMCT 16031001BT1 can be summarized in three key steps:

1. Input voltage is divided between the two output terminals. The division is based on the ratio of the resistors in the network.
2. The current flowing through each resistor is measured and compared to the desired value. If the current is too high, the voltage at the output is regulated. This protects the circuit from possible overloads.
3. Finally, the output voltage is monitored and adjusted if needed. The amount of adjustment is based on the accuracy of the resistor network, which is typically less than 0.2%.

By utilizing this three-step process, the NOMCT 16031001BT1 can provide consistent voltage and current regulation in high-voltage applications.

In conclusion, the NOMCT 16031001BT1 three-terminal resistor network can be used for a variety of applications. The device is capable of providing a voltage divider, current barrier, or protective overload, as well as providing electrical isolation. The working principle of the device is based on dividing the input voltage between two output terminals, measuring and comparing the current flow, and then adjusting the output voltage as needed. By using the NOMCT 16031001BT1, engineers can provide reliable and stable power to their circuits and applications.

The specific data is subject to PDF, and the above content is for reference