NR3010T3R3M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Fixed Inductors

An inductor, also known as a coil, choke or reactor, is a passive electronic component used to store energy in the form of magnetic flux. The two prongs of the fixed inductor are connected to a circuit, forming a loop. The electric current flowing through the loop produces a magnetic field, which induces an electromotive force (EMF). This EMF generates a counter electromagnetic field, opposing the initial magnetic field and therefore limiting the current flow. Fixed inductors are similar in nature to variable inductors, but their value isn’t adjustable and therefore they are not used to change the current level in the circuit. Despite this, fixed inductors are employed in a variety of applications which require either a source of magnetic field or electrical resistance.

NR3010T3R3M Application Field and Working Principle

The NR3010T3R3M Surface-Mount Fixed Inductors is widely used in modern electronic circuits. The product contains robust materials like Iron- Powder Base Lamination Core and Copper Wire Winding Core, withstanding higher temperatures than conventionalInductors. Additionally, the product also has a variety of features that make it ideal for use in a variety of applications. The product can handle up to 3 Amp of current and features a wide and precise range of inductance, ranging from 20 to 81.2nH. Overall, the product is designed to provide superior performance for power, signal, and switching applications.

The fixed inductor works on the principle of Electromagnetic Induction. This principle states that a voltage is induced in a loop of wire when a changing magnetic field is applied to it. This is adapted to the fixed inductor by passing a current through its windings which generates a magnetic field. This field then induces a voltage in the windings themselves. This voltage is then mirrored by the opposing current in the inductor, thus limiting the current which flows through it.

In some applications, the inductor acts as a source of magnetic field. The fixed inductor can act as a filter for power-supply designs. The magnetic field created by the inductor helps minimize signal distortion and electrical noise. It also improves the step response of the circuit. Moreover, it provides protection from overvoltages and helps limit the current flow.

Additionally, the fixed inductor can also be used in antenna designs. The inductor is used to create a resonance which enhances the performance of the antenna. The inductor is also used in filter networks such as notch filters, low-pass filters, and high-pass filters. The inductor is used to create impedance changes in the circuit, allowing the user to achieve desirable frequency responses.

In conclusion, the NR3010T3R3M Surface-Mount Fixed Inductors are capable of a variety of applications. This product has a wide and precise range of inductance, can handle up to 3amps of current, and contains robust materials for withstanding higher temperatures. The inductor works on the principle of Electromagnetic Induction and can be used in a variety of applications such as power-supply design filter, antenna design, filter networks, and more. Overall, the NR3010T3R3M is an ideal product for fixed inductor applications.

The specific data is subject to PDF, and the above content is for reference