NRG4026T100M Inductors, Coils, Chokes

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are used for a wide range of electrical and electronic applications. One such type of inductor is the NRG4026T100M, a shielded wire-wound inductor designed for use in RF applications. This article will examine the application field and working principle of the NRG4026T100M inductor.

The NRG4026T100M is designed for use in radio frequency (RF) applications, such as radio frequency communications. It is particularly suited for use in radio receivers, transmitters and other high-power RF circuits. The inductor is also suitable for use in switching power supplies and high-precision audio systems. The NRG4026T100M has a high saturation current capability, making it suitable for powering high-current RF circuits and applications that require a large inductance.

The NRG4026T100M is a shielded wire-wound inductor. This type of inductor is designed to generate a magnetic field and control the current flow in a circuit. When a current is passed through the inductor, a magnetic field is generated around it which induces a voltage in the designator. The amount of voltage generated is dependent on the magnitude of the current. The inductor acts as an electromagnet and stores energy in its magnetic field.

The NRG4026T100M has a windings type of 10 - 20 turns of AWG #26, a wire length of 4.85mm, a diameter of 3.2mm, a resistance value of 0.046 ohms and an inductance of 10uH. The inductor has a maximum rated operating frequency of 1MHz, a maximum saturation current of 100mA and a maximum temperature rise of 55 degrees Celsius.

In addition to its shielded wire-wound design, the NRG4026T100M also features a double side magnetic shield to reduce radiated noise and improve the performance of the inductor. The inductor is also designed to have a low EMI and is RoHS compliant.

The NRG4026T100M is a shielded wire-wound inductor designed for use in radio frequency applications. It is suitable for radio receivers, transmitters and other high-power RF circuits, as well as switching power supplies and high-precision audio systems. The inductor features a windings type of 10 - 20 turns of AWG #26, a wire length of 4.85mm, a resistance value of 0.046 ohms and an inductance of 10uH, as well as a maximum operating frequency of 1MHz, a maximum saturation current of 100mA and a maximum temperature rise of 55 degrees Celsius. In addition, it features a double side magnetic shield to reduce radiated noise and is RoHS compliant.

The specific data is subject to PDF, and the above content is for reference