NRH2410T3R3MNV

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are electromagnetic components that consists of a coil of copper wire wrapped around a core. The core is typically made of ferrite or iron, although other materials, including air and plastic, can also be used. The inductor stores energy in the form of a magnetic field. An inductor resists rapid changes in current, and is often used in circuits to reduce ripple and noise.

The NRH2410T3R3MNV fixed inductor is a small surface mount component, with a low height profile. The inductance is rated at 3.3nH and the current rating is 500mA. This product is designed for use in applications ranging from RF communication (GPS, WLAN, Bluetooth, etc.) to automotive and consumer electronics.

Measuring only 2.0 x 1.2 x 1.1 mm, the NRH2410T3R3MNV is very compact and has high current and inductance characteristics. This makes it suitable for use in high frequency circuits including automotive, consumer, power electronics and RFID applications. In addition, the device is resistant to shock and vibration, making it suitable for use in automated equipment.

The working principle of the NRH2410T3R3MNV is based on Faraday\'s Law of Induction. When current flows through a coil, a magnetic field is generated around it. When this magnetic field collapses, a voltage is induced in the coil. This voltage is proportional to the rate of change of the current.

In practical applications, the presence of the inductor in a circuit can be used to reduce noise and eliminate spurious high frequency signals. This is done by slowing the rate of change of current and providing power on a more gentle slope. When the peak current is reached, the inductor stores the energy and then releases it at a more constant rate. This helps to reduce the noise and signal ripple, which can improve the performance of the circuit.

The NRH2410T3R3MNV is designed for use in high performance circuits operating at frequencies up to 5 GHz. It is pre-tin plated and offers low DCR (0.062 Ohm). This makes it suitable for use in noisy and high current consumption circuits. In addition, the inductor has excellent low frequency characteristics which make it ideal for use in switch mode power supplies and resonant circuits.

The NRH2410T3R3MNV is a high performance fixed inductor which offers excellent electrical and mechanical characteristics. It is suitable for use in a wide range of applications including RF Communication, Automotive and Consumer Electronics. The device works based on Faraday’s Law of Induction, and helps to reduce noise and ripple in power circuits. This makes it an ideal choice for high performance circuits operating at high frequencies.

The specific data is subject to PDF, and the above content is for reference