NRS8030T1R5NJGJ Inductors, Coils, Chokes

DC Resistance (DCR):	15.6 mOhm Max
Height - Seated (Max):	0.118" (3.00mm)
Size / Dimension:	0.315" L x 0.315" W (8.00mm x 8.00mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	100kHz
Operating Temperature:	-25°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	80MHz
Q @ Freq:	--
Series:	NR, S Type
Shielding:	Shielded
Current - Saturation:	6.2A
Current Rating:	5.3A
Tolerance:	±30%
Inductance:	1.5µH
Material - Core:	Ferrite
Type:	Wirewound
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are widely used in the electronics industry. They are typically used in applications where current passes through a conductor or a coil. The core of the inductor typically consists of a ferrite core or an air core that is designed to provide more consistent electrical characteristics and to improve the efficiency of the inductor. A fixed inductor, such as the NRS8030T1R5NJGJ, can be used for a variety of applications, including RF, high frequency, switching, and power regulation.The NRS8030T1R5NJGJ fixed inductor is a surface-mount, non-shielded component that can handle a current up to 3 amps. It is designed for general purpose electronic applications such as power conversion, signal processing, and current sensing in circuits. It is constructed from a ferrite core encapsulated in a ceramic package for maximum temperature, vibration, and moisture resistance. The NRS8030T1R5NJGJ fixed inductor also has a low DCR, higher current capacity, and improved inductance linearity than traditional ferrite-core inductors.The operating principle of the NRS8030T1R5NJGJ is based on Faraday\'s law of induction. This law states that an increase or decrease in the number of turns in a copper winding coil will induce a current in the coil proportional to the rate of change of magnetic flux. The inductor functions as a steady current source, allowing electrical currents to move in a single direction and step up or down the voltage depending on the current and number of turns.The most common applications for the NRS8030T1R5NJGJ fixed inductor are DC to DC converters, switched-mode power supplies (SMPS), and general-purpose filter inductors. As a DC-to-DC converter, the inductor will typically be used to step up the voltage or to reduce the ripple of a chaotic current, using an oscillator to pass power through the coil as the frequency is increased. The inductor also acts as an inductive filter, allowing signals to pass through it while blocking DC current.Finally, in switched-mode power supplies, the inductor is used to absorb the current and store it in the electromagnetic field of the inductor. When the current is applied, the magnetic field collapses and is converted into electrical energy. This energy is then used to energize the various components of the electronic system, such as the transistors or integrated circuits.The NRS8030T1R5NJGJ fixed inductors are designed to handle a wide range of current and operate at a variety of frequencies, making them ideal for both commercial and consumer applications. They are also highly reliable, providing consistent performance and high levels of protection. These inductors are a cost-effective and reliable solution for a range of applications and are suitable for a variety of electronic devices and systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description