NT24L55-DTF8S

The NT24L55-DTF8S is a Linear - Amplifiers - Special Purpose and has a range of applications.

The device is a monolithic planar transistor with a half bridge driver and integrated protection and control circuitry. It is designed to drive load circuits with power ranging from 10 watts to 200 watts. It is suitable for use in low noise and high output power audio applications, including amplifier and VC reference power supplies.

The NT24L55-DTF8S is also suitable for driving of current sources and inductive loads, power regulation and temperature control, and DC/DC converter. It is designed to operate in a wide range of ambient temperatures and is capable of providing either symmetrical or asymmetrical output current.

The NT24L55-DTF8S is a linear amplifier module with a power output rating of 200 W maximum, an output voltage range of 0 to 15V and an input supply of 12 Volts. It can operate in both push-pull and single-ended configurations. The device is composed of four 200 W MOSFET stage each with common source and gate connections, protection and control circuitry. The protection and control circuit provides turn-on and turn-off control, PWM output waveform generation, and the current limit (the percent of the maximum device is limited to not exceed).

The device maintains the temperature of the power devices at a safe level and also provides a signal voltage output that is proportional to the current output of the device. This signal voltage is used to monitor the output current, as well as to provide a signal for the protection and control circuit for alarm outputs.

The operation of the NT24L55-DTF8S can be divided into two separate parts, the power section and the control section. The power section is composed of the four MOSFETs and a power supply. The power supply provides the power for the MOSFETs, which are connected to form two independent H bridges. The two H bridges can be connected in either push-pull or single-ended configuration which allow the output current level to be regulated in a highly efficient way.

The control section of the device consists of the protection and control circuitry. This circuitry controls the turn-on and turn-off of the MOSFETs, the PWM waveform generation and the current limit. The control circuit monitors the output current and generates a signal voltage proportional to the output current. This signal voltage is used to control the power section of the device as well as to provide alarm outputs. The protection and control circuitry also provides a power-on/off delay and a power fail signal.

The NT24L55-DTF8S is a highly efficient and robust device designed to provide high power outputs with low noise and low distortion. It requires very little attention from the user and is suitable for a variety of applications. It is cost effective, making it an ideal choice for engineers and hobbyists.