NV11G000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AC/DC converters are devices that convert alternating current (AC) or direct current (DC) electrical energy into direct current, or vice versa. The NV11G000 AC/DC converter is an example of such a device.

The NV11G000 is a low power AC/DC converter that is designed for use in uninterruptible power supplies (UPS) and automotive power systems. It is a single stage flyback circuit configured as half-bridge with an internal High Voltage MOSFET and synchronous rectifier. The device is capable of operating at input voltages ranging from85Vac to 265Vac and can produce output voltage from 1V (min) to 190V (max). The NV11G000 has a nominal switching frequency of 50kHz or 75kHz, and a maximum power of up to 200W.

The NV11G000 provides exceptional performance in terms of power efficiency, reliability, and EMI compliance. It has an integrated active over voltage protection (OVP) and under voltage protection (UVP) and is in compliance with European regulations such as ETSI EN55022, EMI Compliant, EN55011 (CE Mark). It also has an internal Brown-out Protection (BotP) for low input voltage applications.

The NV11G000 AC/DC converter has several features that make it suitable for a variety of applications. It has an active OVP/UVP and BotP for optimal efficiency and output voltage stability. In addition, the device has a wide range of voltage settings and can be adjusted from 1V (min) to 190V (max). These features allow the NV11G000 to be used in a variety of applications such as consumer electronics, automotive, industrial, and medical.

The NV11G000 AC/DC converter works by transforming the incoming alternating current or direct current power into direct current power. This transformation is achieved through the use of two main components, an inductor and a switch. The NV11G000 has a half-bridge configuration with an internal high-voltage MOSFET and a synchronous rectifier. The internal MOSFET works as the switch, while the synchronous rectifier works as the inductor.

First, the rectifier will convert the incoming AC power source into DC power, while the MOSFET will act as a switch to control the flow of the current. The MOSFET will then control the flow of the power to the load by switching on and off depending on the load requirements. As the load current increases, the MOSFET will switch on for longer periods of time, and as the load current decreases, the MOSFET will switch off for shorter periods of time. This will result in a steady, regulated output voltage at the end of the device.

In conclusion, the NV11G000 AC/DC converter is an ideal choice for a variety of applications such as consumer electronics, automotive, industrial, and medical. The device has an integrated active over voltage protection (OVP) and under voltage protection (UVP) and is compliant with European regulations. It is also ideal for low power applications due to its wide range of voltage settings and its efficient operation. The NV11G000 works by transforming incoming AC or DC power into direct current power.

The specific data is subject to PDF, and the above content is for reference