NZ2520SB-22.5792MHZ-RNA3046A Crystals, Oscillators, Resonators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic devices that generate a repetitive waveform in the form of a sine wave, square, or triangular wave. In electronics, an oscillator is an electronic device that produces a periodic, oscillating electronic signal, often a sine wave or a square wave. Oscillators usually consist of an amplifier and a frequency-determining circuit. Oscillators are widely used in both analog and digital circuits because of their ability to generate a periodic signal with stable frequency and signal amplitude. One example of an oscillator is the NZ2520SB-22.5792MHZ-RNA3046A.

NZ2520SB-22.5792MHZ-RNA3046A is an ultra-low phase-noise quartz oscillator. It is designed for use in general-purpose applications and is able to provide excellent stability, frequency accuracy, and output power. The frequency range of the oscillator is 2000 MHz to 3200 MHz, and it can be used in applications such as video streaming, wireless video transmission, radio communication, digital signal processing, and audio transmitting applications. The oscillator provides extremely low phase noise and fast frequency settling time.

The NZ2520SB-22.5792MHZ-RNA3046A oscillator uses an oscillator circuit that contains a quartz crystal. The quartz crystal is a piezoelectric material that is able to generate a voltage response when a mechanical force is applied. In an oscillator circuit, the quartz crystal acts as a resonator. The quartz crystal is connected to two inductors, which serve as the outputs of the oscillator. A capacitor and a resistor are also located in the circuit to form a feedback loop which provides feedback from the output to the input of the oscillator. This feedback loop is responsible for maintaining the oscillator\'s frequency.

In addition to the oscillator circuit, the NZ2520SB-22.5792MHZ-RNA3046A also contains an amplifier circuit. This amplifier circuit is used to increase the output power of the oscillator, allowing it to be used in applications that require higher output power such as video streaming or radio communication. The amplifier circuit contains a FET, which acts as a voltage amplifier. The amplifier increases the amplitude of the output signal, while the output waveform remains the same. The frequency of the output signal is determined by the frequency of the quartz crystal.

The NZ2520SB-22.5792MHZ-RNA3046A oscillator is used in many applications, due to its excellent stability and high output power. It can be used in applications such as video streaming, wireless video transmission, radio communication, digital signal processing, and audio transmission. In addition, the NZ2520SB-22.5792MHZ-RNA3046A offers extremely low phase noise and fast frequency settling time. This makes it ideal for these applications, as it can produce signals with very low levels of noise, allowing these applications to function properly and without interference.

The specific data is subject to PDF, and the above content is for reference