OD243JE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are the most widely used type of commercial resistors, and their application dates back to the early days of industrial electronics. The OD243JE is a type of through hole resistor that works by providing electrical resistance to current flow in a circuit. This particular resistor is ideal for applications such as power distribution, analog and digital circuits, and high-voltage protection.

The OD243JE is manufactured from a circular disk of conducting material, such as metal, that is coated with an insulating material such as a ceramic, plastic, or even an epoxy that is used to prevent the disk from shorting out against other components. This is the same material used for standard resistors. The OD243JE consists of two metal rods that are connected to the contacts on either side of the resistor. The two rods allow current to pass in and out of the resistor, which is what provides the resistance. The two contact ends are connected to the contacts on the resistor and are usually shorted to a ground, while the other two contact ends are connected to the circuit board and the other components in the circuit.

The OD243JE operates at a fixed resistance value and has a tolerance rating of ±0.5%. This means that the resistance should be close to the stated value in the data sheet, though there may be some variation due to differences in the manufacturing process. The resistance of the resistor is determined by the size of the disk and the thickness of the insulating material. The OD243JE is available in several sizes and can be used in a variety of circuit designs, including those that require a high-voltage rating.

The OD243JE is most commonly used in power distribution systems, where a large number of circuits need to be distributed over many wiring runs. These resistors can also be used for a variety of other applications, including analog and digital circuitry, high-voltage protection, and other types of signal conditioning. Additionally, they are often used to create a dynamic load on the circuit by providing a known resistance to the current flow, thus limiting the amount of current that is allowed to pass through the circuit.

The OD243JE is a dependable and easy to use through-hole resistor that is used in countless electronic applications every day. The resistor\'s fixed resistance value, low tolerance rating, and ease of installation make it a great choice for any project. Its robust design allows it to handle high voltages, making it an excellent choice for power distribution systems. Additionally, its versatility makes it a favorite for circuit designers, no matter what the application may be.

The specific data is subject to PDF, and the above content is for reference