OD2510-05LSS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC fans refer to the power fan that is driven by DC power, which is a motor used to control the speed of current. The OD2510-05LSS is a type of DC fan designed for small and medium-sized systems. This DC fan has a 25mm square frame and a 10mm high profile with an airflow of 2.15 CFM (Cubic feet per minute). It offers good performance under limited space and high temperature environments.

The OD2510-05LSS is a brushless motor and uses PWM signals for speed control. The fan is rated at 1.1A with a 0.09A no-load current. It has a start voltage of 4.5V and a rated speed of 6500 RPM. The fan also has an operating temperature range of -10 to +70° C.

The OD2510-05LSS fan can be used in several applications where a high performance fan is needed despite the limited space. It can be used in consumer electronics and medical equipment systems, such as printers, laptops, home theater components, office equipment, medical equipment, and devices that require high air flow and fast operating speeds. The fan also has an in-built thermal protection which makes it suitable for higher-end medical equipment.

The working principle of the OD2510-05LSS involves the use of a brushless motor. The fan utilizes Permanent Magnet (PM) brushless technology to operate. The PM brushless motor consists of a stator and multi-poles of magnets around the circumference of the rotor. This magnetic field interacts with the coils of the stator and causes an AC current to be generated. This current then induces a magnetic field in the rotor, which causes the fan to rotate.

Ultimately, the fan’s speed is determined by the amplitude and frequency of the voltage applied to the stator. The OD2510-05LSS can be regulated in speed using a Pulse Width Modulation (PWM) signal which is generated by a microcontroller or dedicated PWM controller. The PWM signal can be applied to the tachometer feedback of the motor to regulate the speed of the fan. This provides better control over the fan speed and improved temperature control. In addition, it has a built-in thermal protection which can be set to protect the fan from overheating.

The OD2510-05LSS is a DC fan specifically designed for applications that require a balance of performance and space. It is highly efficient and offers good performance in high temperature environments. The fan is capable of reaching high speeds and is controlled by PWM signals. It also has an in-built thermal protection against overheating. In conclusion, the OD2510-05LSS is an ideal fan for consumer electronics and medical equipment.

The specific data is subject to PDF, and the above content is for reference