OJ-SH-109LMH,000

Power Relays, Over 2 Amps

A power relay is an electrical component designed to switch high power using low power. OJ-SH-109LMH is a type of power relay manufactured by Omron Electronics for use in industrial and consumer electronics devices. It has a rated contact load of up to 2 amps at 24-240 Volts AC (4-15 Amps DC). The OJ-SH-109LMH relay features are surface-mounted and is ideal for use in applications such as motor controllers, automotive relays, lighting controls, as well as home and office automation.

General Features and Specification

• Contact Form: SPST-NO (1 Form A)
• Contact Rating: 4A @ 230Vac, 7A @ 24Vdc
• Dimensions: 22.4mm x 15.3mm x 11.3mm
• Coil Voltage: 12Vdc - 24Vdc
• Pick Up Voltage: 7.6Vdc - 13.2Vdc
• Release Voltage: 5.1Vdc - 9.6Vdc
• Operate Time: 10ms max
• Release Time: 5ms max

Application Field and Working Principle

The Omron OJ-SH-109LMH is a power relay designed to switch high power using low power. It is capable of switching up to 4A at 230V AC, and 7A at 24V DC. The OJ-SH-109LMH is ideal for applications such as motor controllers, automotive relays, lighting controls, as well as home and office automation. The relay operates by energizing the coil, which will close the contacts and allow power to flow through the relay. When the coil is de-energized, the contact opens, and power to the device being controlled by the relay is cut off.

It is important to note that the OJ-SH-109LMH is a surface-mounted component, meaning it must be soldered directly to the board in order to be used. Additionally, it is intended for use in non-hazardous areas only, and should not be used in hazardous environments.

The OJ-SH-109LMH is a reliable power relay, capable of providing reliable switching of power loads up to 7A at 24V DC. It is ideal for use in applications where precision switching is required, and is a great choice for designers looking for a reliable and cost-effective solution.