Allicdata Part #: | OJ3305E-R52-ND |
Manufacturer Part#: |
OJ3305E-R52 |
Price: | $ 0.00 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 33 OHM 1/8W 5% AXIAL |
More Detail: | 33 Ohms ±5% 0.125W, 1/8W Through Hole Resistor Axi... |
DataSheet: | OJ3305E-R52 Datasheet/PDF |
Quantity: | 1000 |
50000 +: | $ 0.00180 |
Series: | Little Rebel® OJ |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 33 Ohms |
Tolerance: | ±5% |
Power (Watts): | 0.125W, 1/8W |
Composition: | Carbon Film |
Features: | -- |
Temperature Coefficient: | -450ppm/°C |
Operating Temperature: | -- |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.073" Dia x 0.138" L (1.85mm x 3.50mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through-hole resistors are electrical components found in an array of electronic applications. The OJ3305E-R52 through-hole resistor is a popular choice for many applications and uses. It is designed for use in both commercial and residential settings and is capable of handling temperatures between -55 and 125 degrees Celsius. This resistor is an axial type component and comes with a 5-watt dissipation rating. The OJ3305E-R52 is primarily used in power supply circuits where the amount of current and/or voltage required is too great for other types of resistors.
The OJ3305E-R52 through-hole resistor is an axial resistor, which means its lead wires pass through the resistor’s body. This axial design allows the resistor to be connected directly to the circuit board, eliminating the need to use additional mounting hardware. The OJ3305E-R52 is a 5-watt resistor that is capable of dissipating up to 5-watts of power. It has a wide temperature range of -55 to 125 degrees Celsius and is available in both ceramic and epoxy resin enclosures.
The OJ3305E-R52 through-hole resistor has a through-hole mounting form factor, which makes it easy to install in printed circuit boards with through-hole construction. The resistor comes with two pre-drilled and tapped mounting holes which allow the resistors to be securely fastened and easily accessible for troubleshooting. The junction of each lead and resistor body is sealed with epoxy for high reliability and vibration resistance. This enables the resistor to accurately maintain its specified resistance over an extended temperature range, while withstanding dirt, dust and moisture.
The OJ3305E-R52 is an axial resistor that has excellent electrical characteristics. It has a wide resistance range of 0.1 ohm to 10M ohm and is available in a variety of tolerance ratings. The OJ3305E-R52 has an excellent pulse and overload life expectancy and is designed to withstand high voltage and current levels without damage. The resistors have a low temperature coefficient of resistance, which makes them suitable for many applications, including power supply circuits, pulse circuits, inverters, etc.
The OJ3305E-R52 through-hole resistor has a variety of uses and functions. Its wide range of resistance values, current and voltage ratings, as well as its high reliability makes it an ideal choice for many applications, such as, switching power supplies, inverters, motor control circuits, and temperature sensors. It is also used in AC and DC power applications, automotive electronics, consumer electronics, communication electronics, renewable energy sources, etc.
The OJ3305E-R52 through-hole resistor’s working principle is that current passes through it, and it limits the current by providing resistance. This resistance value is fixed and doesn’t vary with temperature or time changes. The resistance value is determined by the material used in the resistor. As current passes through the resistor, some of the current is converted into heat, which causes a temperature rise in the resistor. The dissipated power or “wattage” is equal to the voltage squared divided by the resistance.
In conclusion, the OJ3305E-R52 through-hole resistor is a very useful and versatile component. Its wide range of characteristics, ranging from resistance values, current and voltage ratings, temperature coefficient, and pulse and overload life expectancy make it suitable for a variety of applications. It is one of the most reliable and dependable resistors available and is most commonly used in power supply circuits. The OJ3305E-R52 is designed to handle high current and voltage levels and can withstand a wide temperature range without damage. The resistor works by limiting current flow through it, providing reliable and accurate resistance values.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
OJ3305E-R52 | Ohmite | 0.0 $ | 1000 | RES 33 OHM 1/8W 5% AXIAL3... |
OJ3315E-R52 | Ohmite | 0.0 $ | 1000 | RES 330 OHM 1/8W 5% AXIAL... |
OJ3325E-R52 | Ohmite | 0.0 $ | 1000 | RES 3.3K OHM 1/8W 5% AXIA... |
OJ3335E-R52 | Ohmite | 0.0 $ | 1000 | RES 33K OHM 1/8W 5% AXIAL... |
OJ3345E-R52 | Ohmite | 0.0 $ | 1000 | RES 330K OHM 1/8W 5% AXIA... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...