OJE-SH-124LM,000M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Relays, Over 2 Amps

Power relays over 2 amps are devices that are used to control and switch a large amount of electric current between two points. Specifically, the OJE-SH-124LM,000M Power Relay is designed to handle currents of up to 10,000 amperes. It is usually used in high-power applications such as electrical wiring systems. The relay can be used to control both AC and DC voltages, and also provides protection against short-circuits and other overcurrent conditions.

The OJE-SH-124LM,000M Power Relay consists of two main parts: a relay assembly and a control/activation circuit. The relay assembly consists of two conductive arms made from copper, brass, or aluminum, which act as the relay switch contacts. The control/activation circuit is attached to the relay assembly and provides a means to control the switching of the two arms. When the relay is activated, the contact arms are closed and current is allowed to flow through the circuit, providing power to the connected components.

To operate the OJE-SH-124LM,000M Power Relay, certain conditions must first be met. Firstly, a voltage of at least 2.5 volts must be applied across the switch contacts. This voltage will activate the control/activation circuit and cause the contacts to close. Secondly, the current must not exceed 10,000 amperes. Finally, an internal over-current protection circuit must be activated to prevent any excessive current from damaging the device.

The OJE-SH-124LM,000M Power Relay is capable of switching multiple loads simultaneously, depending on the number of arms in the relay assembly. This is done by connecting multiple contact arms to the control/activation circuit and then connecting the loads to the respective contact arms. By activating the control/activation circuit, all loads connected to the relay assembly will be switched simultaneously. The OJE-SH-124LM,000M Power Relay can also be used to control the flow of current in electrical wiring systems, by connecting the relay assembly to the power supply using the appropriate plug and socket arrangement.

The OJE-SH-124LM,000M Power Relay is designed to provide an efficient means of controlling and switching large amounts of electric current. It is capable of switching loads simultaneously, and the control/activation circuit ensures that the current flowing through the circuit is within acceptable limits. Moreover, the internal over-current protection circuit ensures that no excessive current will damage the device. This makes it an ideal solution for controlling large electric currents.

The specific data is subject to PDF, and the above content is for reference