OJE-SS-103LM,000

Turn On Voltage (Max):	2.25 VDC
Coil Resistance:	45 Ohms
Coil Power:	200 mW
Contact Material:	Silver (Ag)
Operating Temperature:	-30°C ~ 90°C
Termination Style:	PC Pin
Mounting Type:	Through Hole
Features:	Sealed - Flux Protection
Release Time:	4ms
Operate Time:	15ms
Turn Off Voltage (Min):	0.15 VDC
Series:	OJE, OEG
Switching Voltage:	277VAC, 30VDC - Max
Contact Rating (Current):	3A
Contact Form:	SPST-NO (1 Form A)
Coil Voltage:	3VDC
Coil Current:	66.7mA
Coil Type:	Non Latching
Relay Type:	General Purpose
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Relays, Over 2 Amps

The OJE-SS-103LM,000 application field and working principle is a type of power relay designed for applications that require switching current levels of 2 Amps and higher. This relay is made of a durable molded plastic housing with an encapsulated coil for greater reliability. The relay is designed to operate at up to 10,000 Watts (10KW) over a range of 4 to 20 Volts DC. The OJE-SS-103LM,000 has a single pole, dual throw (SPDT) contact arrangement with a single location contact and a double-pole contact. The contacts are rated for 30 Amps continuous current and 85 Amps interrupting capacity.The OJE-SS-103LM,000 can be used in a variety of applications. It can act as a master switching device for controlling higher power loads, or as a control switch for a variety of lower power circuits. It is also suitable for use in control systems, switching motor starters, switching power supplies, etc. The OJE-SS-103LM,000 is also suitable for use in Uninterruptible Power Supplies (UPS), solar inverter systems, and other applications that require a reliable, high power, and low voltage switching solution.The OJE-SS-103LM,000 can be mounted on a panel or bulkhead, or can be used as a stand-alone unit. The housing of the relay is constructed of molded plastic and is sealed against dust and moisture. The contact assembly of the relay is made of silver-nickel alloy with a high-temperature silicone insulation. The relay has an LED indicator which will light up under normal operation.The OJE-SS-103LM,000 uses a single coil to switch up to 10KW of power. The contact is capable of switching at up to 30 Amps. The relay can be energized in a variety of ways, either directly with a DC voltage or through an external auxiliary relay. The operation of the relay is indicated by an LED mounted on the contact assembly. The LED will light up to indicate when the relay is energized.The relay operation is dependant on the current passing through the coil. When the current is high enough, the relay trips and the contacts switch. When the current reduces, the contact reverts to its original position.The OJE-SS-103LM,000 is designed for switching current levels over 2 Amps. It is capable of switching a range of amps over a voltage range of 4 to 20 Volts DC. The contact is made of an alloy for increased reliability and offers 30 Amps of switching capacity. The LED indicator illuminates when the relay is energized. This relay is a great option for applications requiring a reliable, high power, and low voltage switching solution.

The specific data is subject to PDF, and the above content is for reference