| Allicdata Part #: | OK1015E-R52-ND |
| Manufacturer Part#: |
OK1015E-R52 |
| Price: | $ 0.01 |
| Product Category: | Resistors |
| Manufacturer: | Ohmite |
| Short Description: | RES 100 OHM 1/4W 5% AXIAL |
| More Detail: | 100 Ohms ±5% 0.25W, 1/4W Through Hole Resistor Axi... |
| DataSheet: |  OK1015E-R52 Datasheet/PDF |
| Quantity: | 1000 |
| 50000 +: | $ 0.00296 |
| Series: | Little Rebel® OK |
| Packaging: | Tape & Reel (TR) |
| Part Status: | Active |
| Resistance: | 100 Ohms |
| Tolerance: | ±5% |
| Power (Watts): | 0.25W, 1/4W |
| Composition: | Carbon Film |
| Features: | -- |
| Temperature Coefficient: | -450ppm/°C |
| Operating Temperature: | -- |
| Package / Case: | Axial |
| Supplier Device Package: | Axial |
| Size / Dimension: | 0.098" Dia x 0.268" L (2.50mm x 6.80mm) |
| Height - Seated (Max): | -- |
| Number of Terminations: | 2 |
| Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors, also known as thru-hole resistors, are one of the most widely used resistors in electronics. OK1015E-R52 is a type of through-hole resistor from a class of resistors called fixed value resistors.
OK1015E-R52s are mounted onto a circuit board through two holes. The holes pass through the body of the resistor, allowing electrical leads to be connected to the terminals of the resistor. The holes are usually smaller than the body of the resistor to enable it to be secured onto the PCB. OK1015E-R52s are usually made from ceramic or metal and have printed markings that indicate the resistance value of the device.
The primary application of OK1015E-R52 is in voltage division circuits. In a voltage divider circuit, two resistors are connected in series to form a voltage divider. The voltage across the two resistors can be calculated using Ohm’s law. The OK1015E-R52 is used in this type of circuit to create an output voltage that is a fraction of the input voltage.
The working principle of OK1015E-R52 is based on Ohm’s law, which states that the voltage over a resistor is equal to the current passing through it, multiplied by its resistance. Therefore, the resistance of the OK1015E-R52 determines how much voltage will be dropped across it in a voltage divider circuit. By changing the resistance value of the resistor, the voltage divider can be adjusted to provide an output voltage that is a fraction of the input voltage.
OK1015E-R52s are used in various other applications as well. For example, they can be used to help filter high frequency signals in power supply circuits. They can also be used to limit the current to prevent electrical circuits from being damaged.
OK1015E-R52s have a wide variety of applications in electronic circuits, making them an essential component for most types of electronics. As a through-hole resistor, they offer stability and reliability in demanding environments, and their low cost makes them an attractive choice for engineers and designers.
The specific data is subject to PDF, and the above content is for reference
| Part Number | Manufacturer | Price | Quantity | Description |
|---|
| OK1005E-R52 | Ohmite | 0.01 $ | 1000 | RES 10 OHM 1/4W 5% AXIAL1... |
| OK1015E-R52 | Ohmite | 0.01 $ | 1000 | RES 100 OHM 1/4W 5% AXIAL... |
| OK1025E-R52 | Ohmite | 0.01 $ | 1000 | RES 1K OHM 1/4W 5% AXIAL1... |
| OK1035E-R52 | Ohmite | 0.01 $ | 1000 | RES 10K OHM 1/4W 5% AXIAL... |
| OK1045E-R52 | Ohmite | 0.01 $ | 1000 | RES 100K OHM 1/4W 5% AXIA... |
| OK1055E-R52 | Ohmite | 0.01 $ | 1000 | RES 1M OHM 1/4W 5% AXIAL1... |
| OK1065E-R52 | Ohmite | 0.01 $ | 1000 | RES 10M OHM 1/4W 5% AXIAL... |
| OK10G5E-R52 | Ohmite | 0.01 $ | 1000 | RES 1 OHM 1/4W 5% AXIAL1 ... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...