Allicdata Part #: | OK1225E-R52-ND |
Manufacturer Part#: |
OK1225E-R52 |
Price: | $ 0.01 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 1.2K OHM 1/4W 5% AXIAL |
More Detail: | 1.2 kOhms ±5% 0.25W, 1/4W Through Hole Resistor Ax... |
DataSheet: | OK1225E-R52 Datasheet/PDF |
Quantity: | 1000 |
50000 +: | $ 0.00296 |
Series: | Little Rebel® OK |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 1.2 kOhms |
Tolerance: | ±5% |
Power (Watts): | 0.25W, 1/4W |
Composition: | Carbon Film |
Features: | -- |
Temperature Coefficient: | -450ppm/°C |
Operating Temperature: | -- |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.098" Dia x 0.268" L (2.50mm x 6.80mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through hole resistors have been a staple in electronics for as long as there have been electronics. The OK1225E-R52 is an example of such a resistor and is found in many applications. This article will discuss the application field and working principle of the OK1225E-R52.
The OK1225E-R52 is a through-hole resistor with a rated power of 0.25W and a value of 52 ohms. It is a single-layer resistor that is made from a metal-oxide film. The resistor has a high resistance accuracy of ±5%. This makes it a great option for applications that require precise resistors.
The OK1225E-R52 is most commonly used in current limiting and voltage splitting circuits. It is ideal for applications where low current or high power are desired, such as lightbulb filaments, heaters, and voltage regulators. The OK1225E-R52 is also well suited for linear applications that require precise current control, such as power supplies, LED drivers, and audio amplifiers.
The working principle of the OK1225E-R52 is based on Ohm\'s Law. Ohm\'s Law states that electrical current is proportional to voltage. This means that if the voltage across a resistor is increased, the current passing through the resistor will also increase. Conversely, if the voltage across the resistor is decreased, the current passing through the resistor will decrease.
The OK1225E-R52 is designed to limit the current passing through a circuit to a specified amount. When the voltage across the resistor is increased, the current passing through is limited to the resistor\'s rated value. This prevents the current from damaging any other components in the circuit.
The OK1225E-R52 is an excellent option for a wide range of applications. Its precisely controlled current limiting and voltage splitting capabilities make it ideal for current limiting and voltage splitting circuits. It is also well suited for linear applications that require precise current control, such as power supplies, LED drivers, and audio amplifiers.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
OK1205E-R52 | Ohmite | 0.01 $ | 1000 | RES 12 OHM 1/4W 5% AXIAL1... |
OK1215E-R52 | Ohmite | 0.01 $ | 1000 | RES 120 OHM 1/4W 5% AXIAL... |
OK1225E-R52 | Ohmite | 0.01 $ | 1000 | RES 1.2K OHM 1/4W 5% AXIA... |
OK1235E-R52 | Ohmite | 0.01 $ | 1000 | RES 12K OHM 1/4W 5% AXIAL... |
OK1245E-R52 | Ohmite | 0.01 $ | 1000 | RES 120K OHM 1/4W 5% AXIA... |
OK1255E-R52 | Ohmite | 0.01 $ | 1000 | RES 1.2M OHM 1/4W 5% AXIA... |
OK12G5E-R52 | Ohmite | 0.01 $ | 1000 | RES 1.2 OHM 1/4W 5% AXIAL... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...