OK2035E-R52

Series:	Little Rebel® OK
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	20 kOhms
Tolerance:	±5%
Power (Watts):	0.25W, 1/4W
Composition:	Carbon Film
Features:	--
Temperature Coefficient:	-450ppm/°C
Operating Temperature:	--
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.098" Dia x 0.268" L (2.50mm x 6.80mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Through Hole Resistors (THR) are a type of resistor with two terminals which are connected to a substrate or circuit board through a hole. Generally, THR are a type of discrete component that is used to limit the current in a circuit or to control its impedance. The THR component is usually composed of three resistive elements: an element of the body, insulation, and a terminal connector.In this article, we are going to focus on one particular type of THR - OK2035E-R52. We will discuss its application field and working principle.

OK2035E-R52 Application Field

The OK2035E-R52 is a through-hole resistor with fast response. It has a high power rating of 3W, although the package size is relatively small.The OK2035E-R52 has good heat dissipation as it uses a heat sink design. The resistor has a copper base or nickel plating, a good uniformity between the soldered leads, and low contact resistance. This allows the resistor to be suitable for a wide range of applications, including electrical and electronic equipment, power supplies, communication systems, automotive systems and medical equipment.In addition, the OK2035E-R52 also has a wide resistance range (from 0 to 9 ohms) with a low tolerance (0.5%). This makes it suitable for precision applications, low temperature measurements, and use in high frequency devices. In addition, it is also suitable for applications with high power dissipation.

OK2035E-R52 Working Principle

The OK2035E-R52 works by placing a current through a resistor. The resistor itself is composed of a metal or ceramic core with two metal plates, called terminals, on either end connected to the body of the resistor.The resistance of the resistor is determined by the material of the core and the distance between the two terminals. When a current is placed through the resistor, the current will encounter resistance as determined by the material and distance of the resistor. This will cause a voltage drop across the terminals, creating a voltage in the circuit.The current passing through the resistor depends on the voltage in the circuit and the resistance of the resistor. The current flow can be controlled by changing the voltage or resistance of the component, making it useful for controlling current in circuits.

Conclusion

The OK2035E-R52 is a type of THR that has a wide range of applications. It has a good heat dissipation, a wide resistance range and low tolerance which makes it ideal for precision applications, low temperature measurements, and use in high frequency devices.The resistance of the OK2035E-R52 is determined by the material of its core and the distance between its two terminals, and the current passing through the resistor is controlled by the voltage or resistance of the component.Overall, the OK2035E-R52 is a useful component for controlling current in circuits and can be used in a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description