Allicdata Part #: | OL1115E-R52-ND |
Manufacturer Part#: |
OL1115E-R52 |
Price: | $ 0.01 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 110 OHM 1/2W 5% AXIAL |
More Detail: | 110 Ohms ±5% 0.5W, 1/2W Through Hole Resistor Axia... |
DataSheet: | OL1115E-R52 Datasheet/PDF |
Quantity: | 1000 |
40000 +: | $ 0.00378 |
Series: | Little Rebel® OL |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 110 Ohms |
Tolerance: | ±5% |
Power (Watts): | 0.5W, 1/2W |
Composition: | Carbon Film |
Features: | -- |
Temperature Coefficient: | -450ppm/°C |
Operating Temperature: | -- |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.118" Dia x 0.354" L (3.00mm x 9.00mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through hole resistors are one of the most common components used in electrical circuits. They are typically composed of a wire, wound around a ceramic or mica core, which is then encased in an insulating material to protect the resistor from external elements. The components can be used to control the voltage, current, or resistance of a circuit, as well as to limit or isolate signals. The OL1115E-R52 is one such component, and is used in a variety of electronic devices and applications.
The OL1115E-R52 is a carbon film surface mounted through-hole resistor. This component is composed of a carbon film element, resistor element, and leads. The carbon film element is constructed with a resistor material suspended in a ceramic substrate. It has a composition of carbon, metal oxide and graphite, which work together to achieve a stable electrical resistance. The resistor element can range in size from 4mm to 10mm and is protected by a coating of polystyrene insulation. The outermost layer of this insulation is composed of a protective epoxy.
The OL1115E-R52 is a reliable and cost-effective resistor which is ideal for use in applications requiring uniform current paths. This through-hole resistor has a power rating of 0.125W, making it suitable for use in most general purpose circuitry. In addition, its tight tolerance of ±3% ensures that accuracy is maintained throughout its working temperature range of -40°C to +105°C.
The OL1115E-R52 is a versatile component which is suitable for a variety of applications. For example, it can be used to avoid sudden electrical overstress (EOS) in telecommunication systems, preventing damage to components and avoiding circuit outages. It can also be used in public address systems, intercom systems, and other audio and video systems that require good signal clarity. Additionally, the resistor is often used in the automotive industry to minimize noise and interference when connecting components in the wiring harness. This ensures that optimal performance is maintained.
The working principle of the OL1115E-R52 is based on the property of electrical resistance. Resistance is the opposition to the flow of electrical current through a wire or other material and is measured in ohms. In order to control or limit the flow of current through a circuit, an appropriate resistor with a suitable resistance must be used. The resistor works by allowing only a specific amount of current to flow through, which is determined by the resistance value. The higher the resistance value, the less current that is able to flow, while a lower resistance value will allow more current to flow.
In conclusion, the OL1115E-R52 is a through-hole resistor which is used in a wide range of applications. It features a power rating of 0.125W, a tolerance of ±3%, and a working temperature range of -40°C to +105°C. The resistor works by controlling the amount of current which is able to flow through a circuit, limiting or isolating signals as required. It is an effective and reliable component, ensuring optimal performance in a variety of applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
OL1105E-R52 | Ohmite | 0.01 $ | 1000 | RES 11 OHM 1/2W 5% AXIAL1... |
OL1115E-R52 | Ohmite | 0.01 $ | 1000 | RES 110 OHM 1/2W 5% AXIAL... |
OL1125E-R52 | Ohmite | 0.01 $ | 1000 | RES 1.1K OHM 1/2W 5% AXIA... |
OL1135E-R52 | Ohmite | 0.01 $ | 1000 | RES 11K OHM 1/2W 5% AXIAL... |
OL1145E-R52 | Ohmite | 0.01 $ | 1000 | RES 110K OHM 1/2W 5% AXIA... |
OL1155E-R52 | Ohmite | 0.01 $ | 1000 | RES 1.1M OHM 1/2W 5% AXIA... |
OL11G5E-R52 | Ohmite | 0.01 $ | 1000 | RES 1.1 OHM 1/2W 5% AXIAL... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...