OL3355E-R52

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors (also referred to as “THRs”) are small cylindrical components with two wires at either end. The two wires are soldered to a small metal tab on the back of a board, and then connected to another component. Through Hole Resistors are used in a variety of circuits, from controlling LED brightness to adding additional resistance to prevent short circuits. The OL3355E-R52 is a Resistor with a rated power of 2 Watt and an impedance of 100 Ohms.

The primary application of the OL3355E-R52 is the control of electrical circuits. A resistor can be used to control the amount of current flowing through a circuit, which can be important, when dealing with delicate equipment. In addition to controlling the current, resistors can also be used to control the voltage in circuits. By increasing the resistance in a certain circuit, the voltage will also increase, which can be used to regulate power.

In order to understand how the OL3355E-R52 works, it is important to understand the basics of resistance. Resistance is the opposition to current flow through a conductor, like a wire. The resistance of any conductor can be measured in Ohms, which is the unit of measure for resistance. The higher the resistance, the more the current is opposed and vice versa. The resistance of the OL3355E-R52 is fixed at 100 Ohms and the rated power is 2 Watts.

The OL3355E-R52 can have a wide range of applications in different electrical circuits. One of its primary uses is to act as a "dummy load" in a circuit. This means that the resistor is connected to an electrical current and it dissipates the energy, which in turn prevents the current from passing through and causing a short circuit. A dummy load resistor can also be used to absorb any extra energy that is present in the circuit.

The OL3355E-R52 can also be used in circuits where the current needs to be limited. For instance, if a circuit carries too much current, the components can be damaged. By placing the OL3355E-R52 in the circuit, the current can be limited and the components will not be damaged. In addition, resistors can also be used to reduce the voltage in a circuit or to increase the voltage, depending on the kind of resistor used in the circuit.

The OL3355E-R52 is also used for several other applications, such as RF filtering, current limiting, voltage regulation and surge protection. This device can be used in circuits to absorb the excess current and prevent the circuit from overloading and becoming damaged.

The OL3355E-R52 has a wide range of applications in electrical circuits. It is used to limit the current, voltage, and power in a circuit. It is also used as a dummy load and to absorb excess energy. This type of resistor is especially useful in high-current circuits, as it can provide extra protection and prevent electrical damage.

The specific data is subject to PDF, and the above content is for reference