Allicdata Part #: | ON1055E-R58-ND |
Manufacturer Part#: |
ON1055E-R58 |
Price: | $ 0.02 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 1M OHM 2W 5% AXIAL |
More Detail: | 1 MOhms ±5% 2W Through Hole Resistor Axial Carbon... |
DataSheet: | ON1055E-R58 Datasheet/PDF |
Quantity: | 1000 |
10000 +: | $ 0.01764 |
Series: | Little Rebel® ON |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 1 MOhms |
Tolerance: | ±5% |
Power (Watts): | 2W |
Composition: | Carbon Film |
Features: | -- |
Temperature Coefficient: | -700ppm/°C |
Operating Temperature: | -- |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.217" Dia x 0.630" L (5.50mm x 16.00mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction
ON1055E-R58 is a through hole resistor that is used in a wide range of applications. The resistor has a wide resistance range from 1 ohm to 10 megaohms and a wide operating temperature range from -55°C to +125°C. It is designed for high accuracy, high reliability, and ease of installation. This paper will discuss the application field of ON1055E-R58 and its working principle.
Application Field
The ON1055E-R58 through hole resistor is suitable for applications such as energy management, consumer electronics, power electronics, automotive electronics, and military applications. It is also suitable for applications such as power supplies, motor controllers, transformers, lighting circuits, and power measurements. The resistor is designed to provide accurate and reliable performance while being able to withstand high temperatures.
The ON1055E-R58 resistor is also used in numerous types of measurement and control systems. It can be used as a voltage reference in a DC to DC converter, as a current sensor in a power management system, as a voltage feedback divider in an amplifier circuit, as a voltage divider in a bridge circuit, and as a temperature sensor in thermal management systems.
The resistor is also used in amplification circuits and oscillators. It can be used to provide a feedback signal to an amplifier or oscillator for improved regulation and accuracy. The resistor can also be used as an output isolator for amplifiers or oscillators, to prevent feedback from shorting out other components.
The resistor is also used for voltage regulation. It is used in voltage regulators to maintain a set output voltage. It can also be used to provide long-term stability in oscillators and AC to DC converters. The resistor is also used to provide high-impedance control of power supplies and motor controllers.
Working Principle
The ON1055E-R58 resistor works on the basic principle of resistance, which is the opposition to current flow. The resistance of the resistor is determined by its geometry and material properties. The resistor is designed to provide accurate and reliable performance while maintaining a high temperature range. The resistance of the resistor increases as the temperature increases. The resistor is designed to have a low thermal coefficient, meaning it does not change resistance much with temperature.
The resistor is also designed to tolerate a wide range of power dissipation. The resistor can handle high temperatures without suffering any damage. The resistor is designed to withstand a wide range of vibration and shock, meaning that it can be used in areas prone to vibration or shock without suffering any damage.
The resistor is also designed with a high tolerance for power, meaning that it can be used in applications where high power levels are present. The resistor is also designed with a high tolerance for environmental conditions, meaning that it can be used in applications where environmental conditions may vary significantly.
The resistor is designed to be incredibly reliable for a long time. The resistor is designed to maintain its properties for many years, even when exposed to extreme temperatures and vibration. The resistor is also designed to be highly accurate, meaning that it can be used in precision applications.
In conclusion, the ON1055E-R58 through hole resistor is a highly reliable, accurate, and long-lasting resistor suitable for a wide range of applications. The resistor works on the principle of resistance and is designed to provide accurate and reliable performance while being able to withstand high temperatures. The resistor is also designed to tolerate a wide range of power dissipation, vibration, and shock, as well as environmental conditions. The resistor is highly accurate, meaning that it can be used in precision applications. The resistor is also incredibly reliable for a long time, meaning that it can be used in applications that require long-term reliability.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
ON1005E-R58 | Ohmite | 0.02 $ | 1000 | RES 10 OHM 2W 5% AXIAL10 ... |
ON1015E-R58 | Ohmite | 0.02 $ | 1000 | RES 100 OHM 2W 5% AXIAL10... |
ON1025E-R58 | Ohmite | 0.02 $ | 1000 | RES 1K OHM 2W 5% AXIAL1 k... |
ON1035E-R58 | Ohmite | 0.02 $ | 1000 | RES 10K OHM 2W 5% AXIAL10... |
ON1045E-R58 | Ohmite | 0.02 $ | 1000 | RES 100K OHM 2W 5% AXIAL1... |
ON1055E-R58 | Ohmite | 0.02 $ | 1000 | RES 1M OHM 2W 5% AXIAL1 M... |
ON1065E-R58 | Ohmite | 0.02 $ | 1000 | RES 10M OHM 2W 5% AXIAL10... |
ON10G5E-R58 | Ohmite | 0.02 $ | 1000 | RES 1 OHM 2W 5% AXIAL1 Oh... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...