OPA134UAG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The OPA134UAG4 (UAG4) is one of the many operational amplifiers (op-amps) available, and is designed for use in Instrumentation, Buffer, and, Amplification applications. An operational amplifier is an integrated circuit (IC) normally consisting of one or more amplifying sections. Each section has one or more stages that can be purposely optimized or ‘tuned’ to suit the desired application.

The UAG4 has a two-stage, fully differential, single-ended input, low noise op-amp, designed to deliver high performance in a variety of applications. It features an internal 800 MHz rail-to-rail output buffer amplifier with adaptive biasing to ensure the highest performance with low-noise operation. The UAG4 also includes a wide bandwidth, high slew rate, high dynamic range, and low harmonic distortion.

The UAG4 is ideally suited for applications such as instrumentation amplifiers, signal conditioning, filters, level shifting, and data acquisition systems. It can also be used for signal buffering, differential-to-single-ended signal conversion, signal buffering, current-feedback amplifiers, transimpedance amplifiers, signal isolators, active filters, and audio applications. The UAG4 also provides excellent thermal management when used in precision analog signal processing applications.

The UAG4 offers excellent AC performance, featuring outstanding low-noise performance, wide bandwidth (180MHz), high slew rate (200V/μs), and high gain-bandwidth product (1700V/μs). It has a low harmonic distortion of -89dB, and the DC performance remains excellent with a low bias current of 30 nA. In addition, the UAG4 has very low input offset voltage, low input offset current, low input bias current, and low output voltage drift.

When it comes to working principles, the UAG4 is based on negative feedback, which is an open loop voltage amplification system where the output voltage is proportional to the input voltage, minus a fraction of the output voltage. The fraction controlled by the feedback network. This feedback network reduces the gain of the amplifier by decreasing the amount of the output voltage that is sent back to the input. Negative feedback is essential for two primary reasons: it prevents the amplifier from oscillating, and it allows it to maintain a stable gain across a wide range of frequencies. The UAG4 also features a high-impedance input stage and a unity gain stable output stage to ensure excellent AC performance.

The UAG4 operates from a single supply of 4.5V to 18V, and its maximum output current is approximately 100mA. It is available in an 8-pin PDIP, SOIC, and TSSOP packages. The UAG4 is very cost-effective and is priced competitively compared to other op-amps in its class.

Overall, the OPA134UAG4 is an incredibly powerful and reliable IC for Instrumentation, Buffer, and Amplification applications. Its low noise operation and wide operating range makes it an ideal choice for precision analog signal processing. Its low harmonic distortion further enhances its reliability, while its low bias current, low input offset, low input bias current, and low output voltage drift provide greater accuracy and higher performance. The UAG4 is also very cost-effective, making it perfect for both budget-conscious and performance-minded consumers.

The specific data is subject to PDF, and the above content is for reference