OPA2317ID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The OPA2317ID is a low power, high-precision operational amplifier used for a variety of applications. It is an input and output pin-compatible single amplifier, which is suitable for a wide range of signal conditioning applications. It has a high precision and excellent common-mode rejection (CMR) ratio, making it suitable for applications where low offset and drift are required. The OPA2317ID is also excellent for applications requiring low power consumption and a wide bandwidth.

The OPA2317ID has been designed to provide excellent linearity and high signal-to-noise performance. It has a low input noise voltage of 1.6 nV/√Hz and high CMR of 80 dB. It is also designed to be very flexible, as it can be configured for single or dual supply operation and allows a wide range of power supply voltages. It also has an enable function for power-saving operation.

The OPA2317ID provides an input operating range from ±1.25 volts to ±18 volts. It has a single-supply operation of 1.8-V to 5.5-V and dual-supply operation of ±0.9-V to ±5-V. The device can provide output voltage swings of up to ±10V. The maximum output current of the OPA2317ID is 10mA, with a minimum output current of 0.1mA. The output impedance is also very low, at 1.6 Ω, making it suitable for driving high-impedance loads.

The OPA2317ID is also capable of providing high slew rate of up to 900V/μs, with a maximum input voltage noise of 0.5μVp-p. It also features a fast response time of less than 10μs, making it ideal for a wide range of fast switching applications. The device also has a low input bias current of 2.1 pA/V, making it suitable for low-noise, low-power applications.

The OPA2317ID is mainly used for instrumentation applications. It is suitable for high-precision measurements, as it has a low input offset voltage and drift. It is also suitable for low-noise, high-precision signal conditioning applications, as it has a low input noise voltage and high CMR. Additionally, the device is suitable for low-power, wide-bandwidth applications, due to its low power consumption and wide bandwidth.

The OPA2317ID works by amplifying the input signal and providing an output voltage proportional to the difference between the positive and negative input voltages. The device is designed to ensure that the output voltage is proportional to the input voltage over the specified input range. The amplifier has an internal voltage reference that biases the output to the desired value. The internal circuitry also provides the necessary negative feedback to maintain the output voltage within the specified range.

The OPA2317ID is a versatile and highly accurate operational amplifier ideal for a broad range of instrumentation and signal conditioning applications. Its low power consumption, wide bandwidth, and low noise make it an ideal choice for applications requiring precise, low-noise measurements. It is also beneficial for applications needing low power consumption and a fast response time. This makes it an excellent choice for instrumentation, sensor interface and audio applications.

The specific data is subject to PDF, and the above content is for reference