OPA2353UA

Voltage - Input Offset:	3mV
Base Part Number:	OPA2353
Supplier Device Package:	8-SOIC
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply, Single/Dual (±):	2.5 V ~ 5.5 V, ±1.25 V ~ 2.75 V
Current - Output / Channel:	40mA
Current - Supply:	5.2mA
Series:	MicroAmplifier™
Current - Input Bias:	0.5pA
Gain Bandwidth Product:	44MHz
Slew Rate:	22 V/µs
Output Type:	Rail-to-Rail
Number of Circuits:	2
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The OPA2353UA is a high-performance, monolithic op amp that is used in a variety of applications, such as instrumentation and buffering amplifiers. It is an integrated circuit that is composed of several circuit building blocks, such as the operational amplifiers and the transistor. This is one of the most reliable and quality operational amplifiers available in the current market.Instrumentation amplifiers are used in a variety of fields and applications. One of their most common application is in medical and laboratory equipment, where they are used to measure and amplify physical parameters, such as pressure and temperature. They are also commonly used in test and measurement systems and industrial automation systems.The working principle of the OPA2353UA is the same as the other operational amplifiers. It amplifies the input voltage or current and then produces an amplified output voltage or current. This operational amplifier consists of four main circuit blocks. These are the non-inverting amplifier, the inverting amplifier, the operational gain stage and the output buffer.The non-inverting amplifier is composed of two transistors and a feedback resistor. It takes the input voltage, amplifies it, and outputs the amplified signal. The inverting amplifier is made of three transistors and a feedback capacitor. It inverts the input signal and amplifies it before sending it to the output. The gain stage is made up of two transistors and a gain resistor. It controls the gain of the amplifier and helps to stabilize the output signal. Finally, the output buffer consists of two transistors and a capacitor which provide the final output voltage.The OPA2353UA is designed to offer a low noise level and a high output current. It has a low input bias current and a low output offset voltage. It also has a high common-mode rejection ratio, meaning that it can reject most external noise, allowing for accurate and stable measurements.The OPA2353UA is also designed to be very reliable and provide a long life. It is also a very efficient device as it consumes very little power. This makes it an ideal choice for battery-powered applications.Overall, the OPA2353UA is a very reliable and quality operational amplifier that is suitable for a wide range of instrumentation, buffer amplifier and other amplifier applications. It offers excellent performance, is highly reliable and consumes very little power. It is the perfect device for demanding applications that require a high level of accuracy, stability and reliability.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description