OPA27GP

Voltage - Input Offset:	25µV
Base Part Number:	OPA27
Supplier Device Package:	8-PDIP
Package / Case:	8-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply, Single/Dual (±):	8 V ~ 44 V, ±4 V ~ 22 V
Current - Output / Channel:	25mA
Current - Supply:	3.3mA
Series:	--
Current - Input Bias:	15nA
Gain Bandwidth Product:	8MHz
Slew Rate:	1.9 V/µs
Output Type:	--
Number of Circuits:	1
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The OPA27GP is a powerful and versatile instrumentation amplifier ideal for a variety of applications. The device is specifically designed for use in precision medical, industrial and consumer electronics applications, where its low cost, low power consumption and high performance come in handy. Its wide bandwidth, low input noise and low offset cycles make it ideal for a wide range of measurement and control systems.The OPA27GP is built with a buffered voltage feedback architecture that makes it possible to achieve high open-loop gain, low input offset voltage and drift, and wide bandwidth. This makes the OPA27GP ideal for precision applications requiring low temperature coefficient and frequency response times. The low voltage supply requirements make the OPA27GP suitable for low-cost and low- power applications. The extreme stability and monolithic construction of the OPA27GP assures a long product life.The OPA27GP has two input ports and one output port. The inverting input is normally connected to ground, while the non-inverting input is connected to the output of the power amplifier. The output of the OPA27GP is connected to the load. The signal to be amplified is applied to the non-inverting input. The signal is then amplified and the resulting output is applied to the load.The OPA27GP operates from a dual power supply ranging from +2.7V to +6V. The supply current required is around 100 μA and the output current is range from 5A to 20A. The device can handle transient power-supply spikes of up to over twice the rated supply voltage. The output impedance is around 4Ω, allowing for easy interfacing with external circuits. The device has a high common-mode rejection ratio (CMRR) exceeding 80dB over the temperature range of -25°C to +70°C.The OPA27GP offers exceptional performance characteristics and is ideal for a wide range of analog applications. It provides high-accuracy measurement and control of a variety of signals. It is also suitable for motor drive and speed control applications, as its wide bandwidth, high output current and low output impedance make it an ideal choice for these types of applications. Furthermore, the OPA27GP can be used in precision sensor applications, as its ability to amplify very small signals without introducing errors makes it perfect for this purpose.Overall, the OPA27GP is a versatile and powerful instrumentation amplifier, suitable for a wide range of precision medical, automotive, industrial and consumer electronics applications. Its buffered voltage feedback architecture, low-power consumption and wide bandwidth make it perfect for a variety of applications. Its low offset drift, wide temperature range and easy interfacing with external circuits make it a perfect choice for precision measurements, motor drive and speed control applications, and precision sensor applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description