OPA452TAG3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

OPA452TAG3 is an instrumentation, OP Amp, and Buffer Amp which is designed to offer higher performance levels and improved reliability. It is widely used in applications that require precision, low-noise amplification and low-voltage operation. These include automotive, medical and industrial instrumentation, testing and measuring equipment, process control, audio, and other similar applications.

The OPA452TAG3 consists of two monolithic Op Amps in an 8-pin SOIC package. It is a two-channel, low-offset, high-output voltage amplifier. The low offset is achieved via low input bias current, which helps reduce drift and temperature sensitivity. Offset voltage is reduced to around 5 mV with a single supply of 3 to 36 V. Output voltage swing goes from Vcc-1.2 V to +Vcc-0.5 V, with a maximum output current of 30 mA.

The amplifier also offers improved regional and production uniformity, meaning that the same performance is seen across different channels of the same device and different devices of the same lot. The OPA452TAG3 is stable over a wide range of temperatures, and features a low supply current of 1.6 mA/channel. The device is protected against short circuit conditions and over-voltage, and is therefore suitable for applications that require robust performance. Additionally, the device is specified for operation over the industrial temperature range, from 0°C to 70°C.

The open-loop gain of the OPA452TAG3 is typically 1,000,000 and the offset and input bias currents are also low, which allows it to be used in a variety of precision applications. The high open-loop gain combined with low input bias currents and low noise results in better signal-to-noise ratios than those achieved with traditional discrete op-amps. The OPA452TAG3 is also ideal for situations where multiple gains are necessary, as it can be connected in an invertible summing amp configuration, allowing it to be used as a gain block, differential amplifier, or level translator.

The working principles of the OPA452TAG3 are based on the common source, as opposed to the common emitter, configuration. This gives it a higher output impedance, meaning that it can drive greater load currents. At the same time, the common source topology includes emitter degeneration and emitter-to-base bias to compensate for non-linearity effects. The source is also current compensated to minimize the effects of transistor parameter variance. This allows the amplifier to deliver a broadband frequency response with wide output swings and low distortion, making it suitable for applications that require accurate signal reproduction.

In summary, the OPA452TAG3 is an ideal solution for a wide range of instrumentation, OP Amp, and Buffer Amp applications. It offers improved regional and production uniformity, low offset, high output voltage swing, and low supply current, making it suitable for a variety of precision applications such as automotive, medical and industrial measures, testing and measuring equipment, process control, audio, and similar applications.

The specific data is subject to PDF, and the above content is for reference