OPA4830IPWG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The OPA4830IPWG4 is an operational amplifier (op amp) developed by Texas Instruments, first released in December 2018. It is a low-cost, low-power, single-channel amplifier specifically designed for precision mixing and audio applications. This op amp is part of the Texas Instruments OPAx800 precision amplifiers family and offers many advantages over other similar devices on the market such as lower power consumption, higher output swing, and improved sound quality.

The OPA4830IPWG4 combines several high performance features. It is built using TI’s advanced low-noise, low-power BiCMOS process and features low-noise voltage gain blocks, fast high-speed output speed, and high slew rate. Other features include wide bandwidth, low distortion, and common-mode input range that extends below ground. The device also features thermal shutdown protection and power-down modes for improved power efficiency. The OPA4830IPWG4 provides excellent dynamic performance for precision instrumentation, mixing, and audio systems.

The OPA4830IPWG4 is designed to answer the requirements of precision instrumentation and mixing systems. Its high speed and wide bandwidth allow it to be used in a variety of sensor and signal condition applications, such as strain gauges and bridge sensors, aeroacoustic sensors, and medical diagnostic systems. Additionally, it can be used in the conditioning of audio signals in loudspeaker systems and consumer audio products, such as amplifiers and microphone pre-amplifiers.

Instrumentation systems often require high-accuracy and repeatable performance, as well as low power consumption, and the OPA4830IPWG4 excels in these areas. It provides excellent dynamic performance, with a low distortion of 0.0001% and wide bandwidth of 900MHz. These features, along with its low noise, fast slew rate, and excellent common mode rejection ratio make it a great choice for precision instrumentation and audio applications.

The OPA4830IPWG4 also offers a power down and standby mode, so its power can be conserved when not in use. This is essential for instrumentation systems where battery power is a concern. In standby mode, the device draws only 35μA of current.

The OPA4830IPWG4 works on the same basic principle as all op amps. It uses two inputs, an inverting input and a non-inverting input, to amplify the difference between them. This Amplified difference is then output at the amplitude set by the gain setting of the device. The OPA4830IPWG4 can be used in either single-ended input or differential input mode.

Overall, the OPA4830IPWG4 is an ideal choice for precision instrumentation and audio systems. Its low power consumption, wide bandwidth, and high speed make it a great choice for applications that require low noise, precise measurements and high accuracy. Additionally, its power-down and standby modes make it an ideal solution for battery powered instrumentation systems.

The specific data is subject to PDF, and the above content is for reference