ORNTA1002AT1 Resistors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays are a combination of resistors which are connected together either in series or in parallel to form different kinds of topologies. The ORNTA1002AT1 is one such resistor network that is specifically designed for high frequency applications.

ORNTA1002AT1 is a differential network which is primarily designed to provide a 50 ohm impedance. It is constructed using high-quality internal resistors that have a tolerance of ±0.5% and a low temperature coefficient of 100PPM/°C. The device is rated for 100 volts and can handle up to 4 Watts of power. It is a four-resistor network comprising of two resistor pairs connected in series.

The main application of the ORNTA1002AT1 is in antenna tuning or impedance matching. The device is usually mounted at the base of an antenna and used to tune the antenna to the desired impedance. The device also provides a balanced 50 ohm impedance and can be used for various system configurations depending on the application.

The working principle of the ORNTA1002AT1 can be explained in two parts. The first part is the resistive network which provides the necessary impedance for the antenna, and the second part is the capacitor network which is used to fine-tune the antenna. The resistor network is made up of two resistor pairs which are connected in series. The first resistor pair has a resistance of 5K ohms and 25K ohms, while the second pair has a resistance of 15K and 65K ohms. The capacitors are connected in parallel with the resistor pairs in order to fine-tune the antenna. The first capacitor is rated for 1.8pF, while the second is rated for 3.8pF.

The ORNTA1002AT1 provides a good fit for high frequency applications. It can be used in various system configurations such as a point-to-point or a Point-to-Multi-Point setup. The device is ideal for Balun applications or any system requiring a high frequency differential impedance. The device is constructed with high-quality components with a tolerance of 0.5%. This makes it ideal for any high frequency application such as Mobile or Wireless Network Transceivers, Antenna Tuning Units (ATUs), or any application needing an impedance of 50 ohm.

The ORNTA1002AT1 is a perfect option for applications that need a balanced differential impedance for high frequency signals. The device is easy to install and comes at an affordable price. The resistor network provides the necessary impedance for the antenna, and the capacitors are used for tuning the device to the desired frequency. The device is one of the best choices for antenna tuning because it provides an excellent impedance match with very little dispersion.

The specific data is subject to PDF, and the above content is for reference