ORNV20012001T3

Number of Pins:	8
Height - Seated (Max):	0.068" (1.73mm)
Size / Dimension:	0.194" L x 0.157" W (4.93mm x 3.99mm)
Supplier Device Package:	--
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Applications:	Voltage Divider (TCR Matched)
Operating Temperature:	-55°C ~ 125°C
Temperature Coefficient:	±25ppm/°C
Power Per Element:	100mW
Series:	ORNV
Resistor-Ratio-Drift:	±5 ppm/°C
Resistor Matching Ratio:	±0.05%
Number of Resistors:	5
Tolerance:	±0.1%
Resistance (Ohms):	2k
Circuit Type:	Voltage Divider
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

。

Resistor Networks, Arrays: ORNV20012001T3 Application Field and Working Principle

Resistor networks and arrays are commonly used electrical and electronic components, such as the ORNV20012001T3, which are made up of several resistors connected to provide a specific electrical potential or resistance value. These components are often used in a wide variety of applications, from simple voltage tests to complex analog signal processing. This article will discuss the application field and working principle of the ORNV20012001T3 resistor network.

Application Field of ORNV20012001T3 Resistor Network

The ORNV20012001T3 resistor network is designed for use in a variety of different applications. It is a high-precision, low-noise resistor array, commonly used in precision voltage-sensing systems, analog signal processing, linear feedback systems, and other applications where precision and stability are of utmost importance. The ORNV20012001T3 is an ideal choice for high-precision voltage sensing with its wide range of resistance values (200 ohm, 1k ohm, 2k ohm and 10k ohm). This makes it an ideal choice for precision voltage sensing applications, as it is able to accurately convert small changes in input voltage to a proportional output voltage. Additionally, the ORNV20012001T3 is also well-suited for use in analog signal processing systems. Its large dynamic range and low-noise characteristics make it an excellent choice for amplifying low-level analog signals.

Working Principle of ORNV20012001T3 Resistor Network

The ORNV20012001T3 operates on the principle of resistance divider networks. A resistance divider is a device that consists of two or more resistors connected in series, the output voltage being the ratio of the resistors in the series. In the case of the ORNV20012001T3, the resistor network consists of four resistors connected in series, with a fifth resistor added at the output to provide a measure of feedback. The resistors are arranged in a series arrangement in order to minimize the noise associated with the voltage sensing process. The output voltage of the ORNV20012001T3 is determined by the ratio of the resistors in the network. As the input voltage is varied, the resistance values of each resistor in the network will change accordingly, and the output voltage of the device will be a result of the difference between the two input voltages. In addition, the feedback resistor provides a means to adjust the gain of the device, thereby allowing for precise control over the output voltage. In order to increase the precision of the device, the ORNV20012001T3 is designed with an on-board amplifier and precision resistors. The amplifier provides a gain of up to 30, allowing the device to amplify even the smallest changes in input voltage. The precision resistors provide a much higher precision than standard resistors, allowing the ORNV20012001T3 to accurately detect even the smallest changes in input voltage.

Conclusion

The ORNV20012001T3 is an ideal choice for applications where precision and stability are of utmost importance. Its wide range of resistance values allows it to be used in precision voltage sensing applications, while its low-noise characteristics make it an ideal choice for analog signal processing. The on-board amplifier and precision resistors provide a high level of precision and accuracy, making the ORNV20012001T3 an excellent choice for use in a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description