OWJMDCLANF-622.080000

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.053" (1.35mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	6-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	50mA
Operating Temperature:	-20°C ~ 70°C
Series:	OW-M
Voltage - Supply:	2.5V
Output:	LVPECL
Function:	Enable/Disable
Frequency:	622.08MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Strip

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators – OWJMDCLANF-622.080000 Application Field and Working Principle

Oscillators are electronic components which generate a continuous alternating current of a certain frequency. OWJMDCLANF-622.080000 is a type of oscillator used to generate low frequency signals. This article will discuss the application field and working principle of this oscillator.

Application Field

OWJMDCLANF-622.080000 oscillators are typically used in a wide range of electronic applications where a low frequency signal is needed. These include:

• Automotive electronics
• Audio and video equipment
• Industrial control systems
• Communications systems
• Space applications

In these applications, the oscillator can be used for frequency or timing control purposes, or for providing a stable reference signal. It can also be used for data transmission, or for generating a wide range of modulation schemes.

Working Principle

When an OWJMDCLANF-622.080000 oscillator is powered up, it will create a sine wave output of a very low frequency, usually in the range of 0.2 Hz to 8 Hz. This is done by a series of integrated circuits, which include a transistor, amplifier, and voltage controlled oscillator.The transistor is used to amplify the input signal and to control the amplitude and phase of the output signal. The amplifier is an operational amplifier that adds additional gain to the signal and also provides the oscillator with a signal conditioning and protection circuit. The voltage-controlled oscillator (VCO) is then used to generate the low frequency sine wave by amplifying the input signal and setting the frequency of the output signal.The frequency of the oscillator is determined by the voltage applied to the control pin of the VCO. This can be changed by adjusting the input voltage or by using an external voltage-controlled resistor. The resistor will alter the frequency by changing its resistance, thus altering the voltage at the VCO control pin.After being amplified and shaped by the integrated circuits, the output signal will be a sine wave of a predetermined frequency, usually in the range of 0.2 Hz to 8 Hz. This output then can be used for a variety of applications, such as timing control, frequency control, or data transmission.

Conclusion

OWJMDCLANF-622.080000 oscillators are widely used in automobile electronics, audio and video equipment, industrial control systems, and space applications. Its working principle involves a series of integrated circuits, which include a transistor, amplifier, and voltage-controlled oscillator. The frequency of the output signal is determined by the voltage applied to the control pin of the VCO, or by an external voltage-controlled resistor. The output of the oscillator is a sine wave of a predetermined frequency, usually within the range of 0.2 Hz to 8 Hz. This output can be used for a variety of applications, such as timing control, frequency control, or data transmission.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description