Allicdata Part #: | OY123KE-ND |
Manufacturer Part#: |
OY123KE |
Price: | $ 0.52 |
Product Category: | Resistors |
Manufacturer: | Ohmite |
Short Description: | RES 12K OHM 2W 10% AXIAL |
More Detail: | 12 kOhms ±10% 2W Through Hole Resistor Axial Moist... |
DataSheet: | OY123KE Datasheet/PDF |
Quantity: | 1000 |
500 +: | $ 0.47250 |
Series: | OY |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 12 kOhms |
Tolerance: | ±10% |
Power (Watts): | 2W |
Composition: | Ceramic |
Features: | Moisture Resistant, Pulse Withstanding |
Temperature Coefficient: | -1000/ -1600ppm/°C |
Operating Temperature: | -40°C ~ 220°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.276" Dia x 0.748" L (7.00mm x 19.00mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are among the most widely used components in electronic circuits. The OY123KE is an example of a Through Hole Resistor, which is primarily used for voltage divider circuits. It is designed to provide precise resistance values needed for any voltage dividing application.
The OY123KE has a wide operating temperature range and comes in 3 watt, 5 watt, and 10 watt varieties. The OY123KE is constructed with an insulating ceramics that has been molded into a cylindrical case with a base on one side and a cap on the other. The resistance element consists of a thick film layer of high quality resistor material, which is printed onto the ceramics. On the end of the cap, there are two contacts that can be used to connect the resistor to the circuit.
The OY123KE is most often used in power supplies, smoke detectors, automotive electronics, and audio equipment. The OY123KE is ideal for power supplies because its 3 watt design can dissipate more heat than standard Through Hole Resistors. In addition, its cylindrical case ensures a consistent connection to the pads, which ensures a reliable connection to the circuit.
The working principle of the OY123KE is quite straightforward. When connected to a power supply, the resistance element within the OY123KE absorbs heat and generates voltage. This voltage is then sent to the load, which determines the resistance of the resistor. The resistor will continue to absorb heat until its resistance is equal to the voltage sent to it--at this point, the circuit is considered to be balanced.
The OY 123KE is the ideal choice when precise resistance values are needed for voltage divider applications. Its wide operating temperature range and high quality construction make it an ideal choice for any voltage divider application. The resistor\'s cylindrical case ensures a consistent connection to the pads, which ensures a reliable connection to the circuit.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...