P0300EALRP1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The P0300EALRP1, part of the family of thyristors manufactured by IXYS Corporation, is a three-phase, 400V ac surge-protection device. The part number P0300EALRP1 is a 6U 600V AC RMS Surge Triggered Thyristor with hV Breakover Voltage. The device is used for protecting electrical equipment from high-voltage surges.

The P0300EALRP1 has a working voltage of 400V AC which is the maximum voltage applied across it. It has a breakover voltage of 200V and the current rating of 700A, which is the maximum continuous current that can be flowing through the device without triggering a surge. It is capable of withstanding short surges of up to 700A.

The P0300EALRP1 is an ideal device for protecting equipment from quick temporary overvoltages or short-duration high-current applications. It is also an ideal solution for providing secondary surge protection in distributed systems, such as electronic circuits in telecommunications, process controls, switching power supplies, medical equipment, consumer electronics and industrial automation.

The parts construction of the P0300EALRP is simple and straightforward. It has an anode layer, cathode layer, and gate layer. The anode layer consists of two zinc oxide dielectric layers, which provide insulation between the anode and the cathode. The anode also includes an active zone layer which is where the current passing through the device occurs when triggered. The cathode includes two layers, the lower layer consists of a platinum-coated zinc oxide dielectric and the upper layer is a B4C dielectric. The gate layer consists of an aluminum oxide dielectric material.

The working principle of the P0300EALRP is based on the fast switching nature of thyristors. The anode and cathode layers create a natural storage of charge when a voltage is applied across them. When the voltage reaches the breakover voltage, the device triggers and the stored charge is released in the form of current. The device is then switched back to its original state when the voltage falls below the breakover voltage.

The P0300EALRP is designed to protect electronic circuits from over-voltages and high-currents. It is capable of withstanding short surges of up to 700A. It is suitable for protection of circuit elements of motor control, telecommunications, water pumping systems, solar solutions, and automotive applications. It is widely used in commercial and industrial applications due to its low power dissipation, fast switching, and low cost.

The specific data is subject to PDF, and the above content is for reference