P1300ECLRP1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are commonly available in the form of three main types: Triacs, SCR (thyristors) and DIACs. Among these, the Triacs are widely used in a range of applications, including voltage protection, motor control, and power switching, thanks to their ability to switch large currents and handle high voltages. The P1300ECLRP1 is one such type of Triac, and it offers a variety of uses in the control of electrical devices.

The P1300ECLRP1 is a three-pin device with a positive Gate, a negative Gate and a positive Anode terminal. Its structure consists of a single gate p-n-p-n layer with both an integrated semiconductor body and an optional heat sink. The main advantages of such a construction are its excellent surge current handling capabilities and a low on-state leakage current. The device is also designed to provide a low quiescent current for stable operation.

The P1300ECLRP1 can be used to control a range of electronic equipment, such as lighting, motors and solenoids. It can also be used as a current control device, where it can be used to trigger an SCR or Triac to switch the load current on and off. The device has a wide operating voltage range, from 0-128 volts, and can handle current up to 20 Amps.

The P1300ECLRP1 is designed to work with a normally open control circuit. When the control circuit is opened, the device conducts a continuous current between its anode and cathode, thus providing a permanent connection between the two. When the control circuit is closed, the device is turned off, and the current is blocked. The device has a zero turn-on voltage, allowing for fast switching, and its power dissipation is reduced at higher switching frequencies.

The P1300ECLRP1 is often used in combination with other thyristors, to provide a greater level of control. For example, it can be combined with an SCR or a diac, to provide a range of levels of control, such as higher or lower current, delay control, and over-current protection. The device also provides protection against over-voltages, supplying circuit breakers with a thyristor valued at higher than its rated voltage.

The P1300ECLRP1 provides a wide range of protection and control capabilities, making it ideal for a range of applications that require fast and reliable switching. Its robust design, excellent surge current handling and low on-state leakage current make it suitable for applications in the control of a variety of loads, including lighting, heating, motors, and solenoids.

The specific data is subject to PDF, and the above content is for reference