P222-100.0M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators have been heavily employed in a variety of applications. One of the most versatile oscillators in terms of its applicability is the P222-100.0M. This oscillator consists of a voltage-controlled oscillator, a buffer amplifier, and an output stage with variable gain control. It is designed to generate sine waves with a frequency range of 100 kHz to 100 MHz.

The P222-100.0M is ideally suited for a number of application areas including communications, instrumentation, and industrial automation. It is a widely used component in communication systems for generating the repetition frequency of modulating signals, or for transmitting or receiving signals in different frequency bands. In instrumentation, the P222-100.0M is suitable for controlling the frequency of scan oscilloscopes, test signals, and other measurement systems. In industrial automation, it is commonly used for modulating and demodulating signals, for generating reference clock signals, and for pulse shaping control.

The working principle of the P222-100.0M is based on phase-locked loop (PLL) principles. This is a feedback loop which consists of a carrier moving along a sine-wave, a reference generator performing comparison operations, and a voltage-controlled oscillator (VCO). The reference generator and the VCO both operate in the frequency domain, and their outputs are compared to each other within the control loop. Depending on the comparison result, the VCO output is adjusted to compensate for any difference in frequency. This process ensures that the output signal of the P222-100.0M is always synchronized with the reference frequency, and is therefore maintained within a narrow range of frequencies.

The other electronic components of the P222-100.0M are used to optimize the performance of the PLL. The buffer amplifier takes the output signal of the VCO and amplifies it prior to reaching the output stage. The output stage is a variable gain controller, which allows the fine-tuning of the output signal amplitude. This can be used to optimize the signal-to-noise ratio of the output signal, and to prevent any signal distortion due to high gain levels.

In short, the P222-100.0M is a highly versatile oscillator which is widely applicable in communications, instrumentation, and industrial automation. It works based on the feedback principle of the PLL, and its other components are used to optimize its output signal.

The specific data is subject to PDF, and the above content is for reference