P261S-D1BS3AB10K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rotary Potentiometers, Rheostats or P261S-D1BS3AB10K are electrical components utilized in a wide range of applications, with a wide variety of technologies. It is used to measure the total resistance in a circuit and is usually connected in a rotatable way so that when the resistance of the total circuit is adjusted through the control knob, the percentage of resistance of the potentiometer also changes.

The P261S-D1BS3AB10K is a potentiometer that features a slip ring shaft, a relatively small design and an adjustable wiper contact. It is a high-precision component made of a carbon-based material with an operating temperature range of -25°C to +105°C. The total resistance of this device is set within the 10K Ohm range, and it uses a linear taper for its resistance adjustment control. This means that there are two terminals which have a fixed resistance to ground and the resistance value from one to the other varies in a linear fashion as the knob is rotated.

Theresistance can be adjusted by rotating the knob, and the rate of change of resistance is linear. This means that if the knob is rotated precisely one-half its total angle, then the resistance will be half of its maximum value, and the different positions of the knob between clockwise and counter-clockwise correspond to different voltage values.

This type of potentiometer is widely used in applications such as circuit testing and measurement, automation, HVAC, metering, and audio equipment. The primary use of the P261S-D1BS3AB10K is to control the voltage of a circuit depending on the location of the knob, and to measure the resulting current. It could also be used to measure the voltage difference between two points in a circuit, or to adjust the resistance values in a certain section of a circuit.

The working principle of a potentiometer is based on the fact that when a voltage is applied across two nodes, the current flows through the potentiometer\'s wiper resistance, in such a way that the voltage at the wiper is proportional to the distance from one point to the other. As the knob of a potentiometer is rotated, the wiper moves along the resistance track and so the resistance between the two nodes changes accordingly. This change of resistance can then be used to measure the current or voltage, and adjust the values accordingly.

The P261S-D1BS3AB10K is a highly reliable and precise device that can be utilized in a variety of applications for precise control of voltage and current. Its small size, linear taper and superb quality make it an ideal choice for a wide variety of projects. Due to its wide range of features and applications, the P261S-D1BS3AB10K is one of the most widely used and popular potentiometers on the market.

The specific data is subject to PDF, and the above content is for reference