Allicdata Part #: | P6P82PS01AG-08CR-ND |
Manufacturer Part#: |
P6P82PS01AG-08CR |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | ON Semiconductor |
Short Description: | IC PEAK EMI REDUCTION 3.3V 8WDFN |
More Detail: | N/A |
DataSheet: | P6P82PS01AG-08CR Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
1 +: | 0.00000 |
Series: | -- |
Part Status: | Obsolete |
Lead Free Status / RoHS Status: | -- |
Filter Type: | -- |
Moisture Sensitivity Level (MSL): | -- |
Frequency - Cutoff or Center: | 5MHz |
Voltage - Supply: | 3.3V |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Interface-Filters-Active: P6P82PS01AG-08CR Application Field and Working Principle
The P6P82PS01AG-08CR is a miniaturized, low-power active filter with a built-in two-pole filter network, located in the FDK Corporation\'s "Pin-type cylindrical filters" product lineup. As one of the most widely used active filters in the market, P6P82PS01AG-08CR is typically used to provide frequency-selective signal conditioning in modem applications. It has a great selection of components available and the most commonly used one is the 8-Ohm resistor.
In terms of specifications, the output voltage of P6P82PS01AG-08CR is adjustable and can reach up to 20V. The typical frequency range is from 100Hz to 200kHz, although it can be extended depending on the application for up to 1MHz. Moreover, the -3 dB cut off frequency is 25dB/dec and the pass band group delay is less than 1uS. With low noise, low distortion and low ripple, P6P82PS01AG-08CR provides high performance for the most demanding applications.
The working principle of P6P82PS01AG-08CR is straight-forward. All components are connected in parallel and the output voltage is adjusted by a control voltage. An external capacitor is used to induce a phase shift in the input signal, which generates the required resonance frequency. The voltage output is then regulated by the control voltage to make the frequency response of the filter linear. With a two-pole passive filter network integrated into the design of the active filter, P6P82PS01AG-08CR can easily provide the desired output voltage at the relevant frequency range.
The P6P82PS01AG-08CR active filter is commonly used in various applications where a higher degree of signal filtering is required. The most common application areas are communication, measurement, and distributed control systems. In communication, P6P82PS01AG-08CR is used to filter out any unwanted noise or signals in order to ensure the proper transmission of data, making it an ideal solution for modems. Measurement applications, such as power measurements and temperature measurements, greatly rely on the accuracy of signals and P6P82PS01AG-08CR active filter is capable of providing this. Furthermore, in distributed control systems, P6P82PS01AG-08CR active filter is repeatedly and widely used in Analog-to-Digital (A/D) and Digital-to-Analog (D/A) conversions, instrumentation amplifiers, data acquisition circuits and process control systems.
In conclusion, the P6P82PS01AG-08CR active filter is widely applied in a range of interface, filter, and active applications. With its two-pole passive filter network integrated design, it can easily provide the desired output voltage at the desired frequency range while producing a low noise, low distortion, and low ripple performance.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
P6P82PS01AG-08CR | ON Semicondu... | 0.0 $ | 1000 | IC PEAK EMI REDUCTION 3.3... |
IC FILTER LOWPASS 8TH 8-SOIC
IC WINDOW COMPARATOR CERDIP
IC FILTER VIDEO SD 14-TSSOP
IC VCM AF DRIVER 2.3V 1CH WLCSP
IC VCM AF DRIVER 2.3V 1CH WLCSP
IC VCM AF DRIVER 2.3V 1CH WLCSP