Q @ Freq:	--
Height - Seated (Max):	0.083" (2.10mm)
Size / Dimension:	0.217" L x 0.209" W (5.50mm x 5.30mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Features:	--
Inductance Frequency - Test:	100kHz
Operating Temperature:	-40°C ~ 125°C
Ratings:	AEC-Q200
Frequency - Self Resonant:	--
Series:	PA5002.XXXNLT
DC Resistance (DCR):	9.54 mOhm Max
Shielding:	Shielded
Current - Saturation:	19A
Current Rating:	13.9A
Tolerance:	±20%
Inductance:	560nH
Material - Core:	Ferrite
Type:	Molded
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Fixed inductors have been a common element in electrical and electronic circuits for many years. From simple coils of wire in household appliances to complex integrated circuits, such inductors allow for the electrical signals to be controlled and transmitted. The practical application and use of a far more advanced version of the fixed inductor – the PA5002.561NLT – is explored in this article.

Application and Use

The PA5002.561NLT is a fixed inductor that can be used in a variety of applications, including leading-edge electronic components, mixed signal designs, radio frequency (RF) amplifiers, amplifiers and filters. Some of the most common uses for this type of inductor include the process of rectification, saturation, regulation and switching. The PA5002.561NLT is well-suited for switching applications, in which a high rate of oscillation or a fast rise time is required. It is also suitable for designs in which the inductance level needs to be maintained over a wide range of conditions, such as temperatures and voltages. By providing a low resistance pathway for current and water to flow and preventing short circuit, these inductors are important for power supplies and for the protection of sensitive circuits from voltage spikes.Furthermore, the PA5002.561NLT has been developed specifically for use in radio frequency (RF) circuits and amplifiers. As such, it incorporates an internal impedance, thereby allowing for the reduction of spurious noise in circuits. The inductor also provides a low inductance-to-capacitance ratio and a wide operating temperature range, making it suitable for applications that require a high speed of response. The fact that the inductor can be integrated into packages as small as 10 mm2 further increases its versatility and potential usability in different types of electrical circuits.

Working Principle

The working principle of the PA5002.561NLT is based on two fundamental laws of electricity: Faraday\'s Law of Induction and Ampere\'s Law. Faraday\'s Law states that a changing magnetic field will induce a voltage or current in a coil of wire, while Ampere\'s Law states that the current induced into a coil of wire will be proportional to the rate of change of the magnetic field around it.By these principles, an alternating current flow (AC) is established within an inductor and is also referred to as a "right-hand wind". This current flow is created by the presence of a magnetic field in the inductor. The stronger the field, the greater the current and the higher the impedance. This current creates an inductance in the coil, which is basically a form of energy storage. The PA5002.561NLT is designed in such a way that the inductance is relatively low when no energy is present and then increases as energy is applied.When the current is switched off, energy is released from the inductor. This is where the current flow slowly decreases, allowing the voltage to drop gradually to its initial level. This is referred to as "left-hand wind".In conclusion, the PA5002.561NLT is a fixed inductor with a wide range of application in electronic designs. It is suitable for both switching and regulating applications due to its low resistance and wide operating temperature range. Its working principle is based on Faraday\'s and Ampere\'s Laws, which helps it to store and release energy as necessary.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description