PAC300001307FAC000 Resistors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thru-hole resistors are a type of resistor which have wires passing through them that are soldered to a circuit board. They are an integral part of many electronic circuits and have a variety of uses. The PAC300001307FAC000 (hereafter referred to as PAC3) is an example of a thru-hole resistor and it is used in a variety of applications. This article will discuss the application field and working principles of the PAC3.

Application Field

The PAC3 is primarily used in low-noise power circuits. They are suitable for data lines with high capacitance and enable high-frequency applications, such as those found in digital electronic circuits and low-noise audio/video equipment. The PAC3 also has a very low thermal resistance, which makes it ideal for use in circuits with high power dissipation.

The PAC3 is also suitable for use in precision circuits, due to its ability to maintain its voltage and current ratings in extreme temperatures. It also allows for easy adjustment of pre-set components, as the resistance can be adjusted by changing the voltage applied to the resistor. This makes the PAC3 ideal for use in systems where precise adjustments and measurements are required.

The PAC3 has a wide range of applications, from consumer electronics to industrial and military equipment. It can be used for signal filtering, voltage divider and snubber networks, as well as noise suppression and surge protection.

Working Principle

The PAC3 works by limiting the current that passes through the resistor when the voltage across the terminals is above the rated voltage of the resistor. The current that passes through the resistor is determined by the resistance value of the resistor. As the resistance increases, the current decreases, and vice versa. This ensures that the circuit does not overload and does not cause damage due to excessive current. The resistance also acts as a buffer, protecting the circuit from overloading.

The PAC3 is composed of several layers of metal, such as nickel, gold, platinum, and silver. The layers are then chemically treated to create a resistive material that has a precise resistance. The metal layers are then wound around a ceramic core, creating a uniform resistance. This allows the PAC3 to maintain its resistance and make minor adjustments in the resistance value with slight changes in the voltage applied to the resistor.

The PAC3 is also designed to dissipate heat generated by the circuit by using a built-in thermistor. The thermistor is designed to measure the temperature of the resistor and reduce the current flowing through the resistor if it gets too hot. This protects the circuit from overheating.

In summary, the PAC3 is a type of thru-hole resistor that is used in low noise power circuits, precision circuits, and for signal filtering and voltage divider networks. It is composed of multiple layers of metal that are wound around a ceramic core and is designed to have a precise, stable resistance value. It also has a built-in thermistor that helps to protect the circuit from overheating by reducing the current flowing through the resistor if it gets too hot.

The specific data is subject to PDF, and the above content is for reference