PAC500003307FAC000 Resistors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are a type of electrical component used in a wide variety of applications. They are often used to control current in a circuit, or to provide impedance between two or more points in a circuit. A through-hole resistor consists of a resistance element, usually a long cylindrical metal element whose surface is coated with a ceramic material, with two or more leads extending through the cylinder and protruding from the ends. The leads of a through hole resistor are usually of the same material, although they may be different materials depending on the application.

The PAC500003307FAC000 is a through-hole resistor that is commonly used in applications that involve high frequencies and voltages. It is designed with two leads, which protrude through the cylindrical body of the resistor. The leads are made of copper and protected from oxidation by a thick film of epoxy. The resistor is designed to be very durable, capable of handling up to 1.2kV. This resistor has an insulation rating of Class U, meaning it can be used in environments where temperatures may reach up to 130C without degradation of performance.

The working principle of the PAC500003307FAC000 is based on Ohm’s Law, which states that the resistivity of any material is directly proportional to the square of the distance between its two points and inversely proportional to the conductivity of the material. This means that when a current passes through the resistor, the current is resisted by the material of the resistor in direct proportion to its resistance. The resistance of the resistor is determined by the thickness and composition of the resistor’s material, as well as the length of the resistor and the temperature of the environment it is used in.

The PAC500003307FAC000 can be used in a variety of applications, including switch mode power supplies, audio frequency circuits, high frequency switching circuits, and power conditioning circuits. It is also commonly used in audio and video amplifiers, signal conditioners, and motor control circuits. It is also a widely used component in chassis-mounted vibration and noise isolation solutions, due to its excellent resistance to vibration and noise caused by mechanical shock.

The PAC500003307FAC000 is an important component in many industries, as it can help reduce power losses and noise caused by power overloads, as well as providing protection from high voltage surges. Its ability to handle high frequency signals and voltages allows it to be used in highly sensitive applications. It is also a cost-effective solution, as it is cheaper than other types of resistors available on the market.

The specific data is subject to PDF, and the above content is for reference