PAF500F48-3.3/T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC to DC converters are an essential part of the power electronics landscape. They have two broad application fields – direct power of loads or components from a source of DC power and the conversion of DC voltage level from one source to another. PAF500F48-3.3/T is a power module of SMPS (Switch Mode Power Supply) type, that is used for DC-DC conversion under demanding conditions. It combines state-of-the-art switching and control elements and its main feature is the possible variation in output power over a wide range of input and output voltage values.

The PAF500F48-3.3/T is designed for high efficiency DC to DC conversion. It contains a pair of fast switching MOSFETs, a flyback transformer, a freewheeling diode, an inductor, a control IC, two RC snubber networks, and a number of external components used for control, regulation, and current limiting. The module is especially suitable for applications in which an input voltage of 24V DC is converted to an output voltage of 3.3V DC and maximum output current of 4A.

The working principle of the PAF500F48-3.3/T is based on the principle of flyback converter operation. When the control IC is switched on, current begins to flow through the primary winding of the transformer and the voltage at the source increases. It then begins to decrease as the voltage reaches the transformer peak voltage, which in turn triggers the MOSFET to turn off. This will cause the energy stored in the transformer primary to be temporarily transferred in the form of a positive voltage to the secondary winding, which generates the output voltage. When the energy stored in the transformer is depleted, the diode opens and the next cycle is initiated.

The module is designed to operate in continuous conduction mode, in which the current in the primary winding changes only during the transition periods. The operation of the PAF500F48-3.3/T is based on controlled switching of the MOSFETs, allowing for power control, switching frequency control, and current limiting in the secondary winding. The operating frequency of the converter is typically in the range of 100 kHz to 500 kHz. The current limiting is provided by a resistor located between the transformer secondary and the output terminal.

The PAF500F48-3.3/T is an ideal solution for applications in which a wide range of input and output voltage values is needed. It is especially suited for those applications in which the input voltage can vary significantly such as in the automotive industry, which requires the converter to be able to operate over a wide temperature range. Additionally, the design of the module offers efficient DC to DC conversion, with low total harmonic distortion and low output ripple, allowing high performance in demanding applications.

The specific data is subject to PDF, and the above content is for reference