PBA150F-5-CMN

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AC DC Converers have become an essential part of many applications due to their ability to convert alternating current (AC) into direct current (DC). The PBA150F-5-CMN is a switch-mode AC DC converter designed to provide an output voltage in the range of 3.3V to 12V and a maximum output current of 5 Amps. It features an active power factor correction (PFC) topology to reduce harmonic distortion and to ensure compliance with most international safety regulations.

The converter contains two different sections. The first section is the power factor correction (PFC) module, which consists of an inductor, an electrolytic capacitor, and a PFC control IC. The PFC circuit takes the input AC voltage and performs a rectification and filter operation, such that the output voltage from the first section is a constant DC voltage. This DC voltage is then used to drive the remainder of the converter circuit.

The second section is the DC/DC section, which consists of transistors, diodes, pulse transformer, inductors and capacitors. This section takes the incoming DC voltage and converts it to the desired output voltage. It also converts the power from the higher DC input voltage into a low-voltage DC output. The PBA150F-5-CMN is also equipped with over-current protection, short-circuit protection, over-voltage protection, over-temperature protection, and under-voltage protection.

The PBA150F-5-CMN can be used in a wide variety of applications including but not limited to embedded systems, automotive electronics, industrial electronics, and test instruments. Since the converter utilizes an active PFC, it is also suitable for applications that require a low THD power supply. Furthermore, the converter is certified to meet both the EN 61000-3-2 and EN 61000-3-3 standards for harmonic emission.

In conclusion, the PBA150F-5-CMN is a reliable AC DC converter capable of providing a constant output voltage in the range of 3.3V to 12V and a maximum current rating of 5 Amps. It is also suitable for applications that require a low distortion power supply and is certified to meet several international safety standards. Furthermore, its small size and versatility make it a suitable choice for embedded, automotive, industrial and test instrument applications.

The specific data is subject to PDF, and the above content is for reference