Allicdata Part #: | PBC-025A1E7-ND |
Manufacturer Part#: |
PBC-025A1E7 |
Price: | $ 0.00 |
Product Category: | Relays |
Manufacturer: | TE Connectivity Potter & Brumfield Relays |
Short Description: | RELAY CONTACTOR 3PST 25A 48V |
More Detail: | N/A |
DataSheet: | PBC-025A1E7 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | PBC |
Packaging: | Bulk |
Part Status: | Obsolete |
Mounting Type: | Chassis Mount, DIN Rail |
Coil Voltage: | 48VAC |
Contact Form: | 3PST-NO (DM) (3 Form X) |
Contact Rating (Current): | 25A |
Switching Voltage: | 380VAC - Max |
Features: | Finger-Safe (IP20) Terminals |
Termination Style: | Screw Terminal |
Operating Temperature: | -5°C ~ 40°C |
Turn On Voltage (Max): | 40.8 VAC |
Turn Off Voltage (Min): | 9.6 VAC |
Contact Material: | Silver Cadmium Oxide (AgCdO) |
Coil Power: | 11 VA |
Coil Resistance: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Contactors (Electromechanical)
Contactors are electromechanical devices used to control large electrical loads, such as motors, lighting, heating, and other industrial applications. They are usually used to switch heavy loads on and off in response to a signal from a controller, such as a thermostat, timer, relay, or PLC (programmable logic controller).
Contactors come in a variety of shapes and sizes, and are made from metals, plastics, or ceramics. Some contactors, such as the PBC-025A1E7, are designed with a compact form factor to allow them to fit into tight spaces.
PBC-025A1E7 Application Field and Working Principle
The PBC-025A1E7 is an electrical contactor that is widely used in industrial and commercial applications, such as motor control, heating, lighting, and the switching of power circuits. This contactor is rated for heavy loads of up to 25A and has a high switching capacity of up to 1E7.
The working principle of the PBC-025A1E7 contactor is to switch a load on and off using an electrical current of the correct magnitude and frequency. To enable this, the device has an internal mechanism which controls the current flowing through the load. When a current is applied, the contactor opens and closes, creating an open circuit or closed circuit, depending on the power requirements of the load. The internal mechanism of the contactor can be triggered either mechanically or electrically. For the PBC-025A1E7, the trigger is provided electrically by either aPLC or other controller.
When a current is applied to the contactor, a magnetic field is generated, which pulls the armature of the contactor, thus triggering the switching action. The switching action is controlled by the magnitude of the impedance of the load. The general rule is that higher the load impedance, higher the contact pressure required to close the contactors. The PBC-025A1E7 contactor features a highly-efficient operating mechanism that allows it to switch loads of up to 25A at very low contact pressure.
In addition to switching loads, the PBC-025A1E7 contactor can also be used for other applications such as power conditioning, surge protection, and circuit protection. This makes the contactor a versatile device for a variety of industrial and commercial applications. Furthermore, the contactor is designed with a compact form factor to enable it to fit into tight spaces, making it ideal for installations in confined areas.
The PBC-025A1E7 contactor is an efficient and reliable device for switching electrical loads. It features a simple and intuitive design, making it relatively easy to install and use. Furthermore, its compact design makes it suitable for applications in confined areas, while its efficiency and durability make it an ideal choice for a variety of industrial and commercial applications.
The specific data is subject to PDF, and the above content is for reference
RELAY CONTACTOR 3PST 25A 120V
RELAY CONTACTOR 3PST 80A 110V
RELAY CONTACTOR 3PST 25A 48V
RLY CONT 4P 110V 50/60HZ NO AUX
RELAY CONTACTORContactor Relay
RELAY CONTACTOR 3PST 15A 12V