PBPC806

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Bridge Rectifiers

The PBPC806 is a diode bridge rectifier that is used in many applications. This type of rectifier is a device consisting of four diodes that are connected in a special configuration. The device is used to convert alternating current (AC) to direct current (DC) in applications requiring a low-cost power supply for low power applications.

The bridge rectifier is composed of four diodes and two parallel AC inputs. The two inputs are connected to the two AC input terminals. When the AC voltage is applied to the diode bridge, current starts to flow in one direction and then reverses direction, producing an output DC waveform. This waveform is usually smoother than the incoming waveform because the bridge rectifier is able to filter out some of the high-frequency ripple.

The PBPC806 diodes bridge rectifier is a four diode bridge rectifier package mainly applies to telecommunication, AC/DC converters, power supplies, and power tools. The PBPC806 is offered in single package with 4 leads. It offers very low forward voltage drop and reverse leakage current for general-purpose applications.

The Advanced Diodes PBPC806 bridge rectifier has an operating voltage range of 50V to 800V and an average forward current rating up to 6A. It also has an average reverse leakage current at 25°C of 5.0A max. The PBPC806 has a maximum reverse voltage rating of 6V. Its peak repetitive reverse voltage is 50V to 800V and junction temperature is - 65°C to +175°C.

In terms of working principle, the PBPC806 bridge rectifier is used to convert AC signal into DC signal. The two input AC voltages are applied to each side of the bridge rectifier. The diodes function as switches, so when the voltage across each diode is greater than 0.7V, they are turned on, allowing current to flow in one direction. When the alternating current reaches its peak value and the voltage across the diodes is less than 0.7V, the diodes turn off, reversing the current and producing the smoother, full wave DC signal.

PBPC806 bridge rectifiers have become increasingly common in modern electronics due to their ability to efficiently convert from AC to DC without the need for large transformers. As a result, they are often used in applications such as power tools, computers, and power supplies. The PBPC806 bridge rectifier is a reliable, high-efficiency rectifier that is built to withstand extreme temperature changes for superior performance and increased reliability.

The specific data is subject to PDF, and the above content is for reference