PC11.09.0100A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PC11.09.0100A Application Field and Working Principle

The PC11.09.0100A is an RF Antenna which is designed for vertical and omnidirectional polar radiation patterns and is most suitable for base stations, repeaters, broadcast systems, microwave links and other communication networks. It is constructed according to the PC11.09.0100A specification requiring high gain and wide bandwidths, while operating in a variety of frequency bands. This antenna is suitable for mounting as a single module art standard interfaces.

Application Field

The PC11.09.0100A is used in a variety of communication networks, including base stations, repeaters, broadcast systems, microwave links and point to point applications. The antenna is suitable for mounting on poles, above ground or on walls, and works well with most radio systems. It is highly recommended for its superior performance and high gain. Additionally, the antenna has a very low Return Loss and Cross-Pol Discrimination.

Construction

The PC11.09.0100A is designed with lightweight aluminum parts and stainless steel hardware which makes it both durable and lightweight. The antenna radiating elements are sealed in anodized aluminum. Additionally, a foam dielectric system is used for superior insulation from moisture and elements. The PC11.09.0100A is designed for a variety of frequencies and is available in various configurations.

Specifications

The PC11.09.0100A has a characteristic impedance of 50 ohms and is designed for a variety of frequency bands. The frequency range for the PC11.09.0100A is 410 MHz to 450 MHz. The antenna has a VSWR of less than 1.5:1 in this band. The PC11.09.0100A has a vertical half-power beamwidth of +/- 38 degrees. Additionally, the antenna has a gain of 11 dBi with a polarization of vertical (V) or multiple (M).

Installation

The PC11.09.0100A is designed for easy installation and accommodating mounting on a variety of substrates. The antenna can be mounted on a pole, wall or ceiling, and comes equipped with 2 U-bolt clamps and 2 snap hooks. The antenna has 4 FM-120-U connector type screws that are used for attaching the antenna to its intended mount. The antenna has a dual polarity configuration, and it can be installed in either vertical or horizontal configurations.

Working Principle

The antenna works because radio frequency energy is emitted in a pattern determined by the configuration of the antenna. The PC11.09.0100A is designed to emit a vertical and omnidirectional radiation pattern. This means that the antenna will emit radio frequency energy in an evenly distributed circular pattern. This type of radiation pattern is ideal for point to point communication, as it requires less power to reach a distant station and provides increased range and signal quality over a greater area.

Conclusion

The PC11.09.0100A is an RF Antenna that is designed for vertical and omnidirectional polar radiation patterns. It is designed to cover a variety of frequency bands and can be easily mounted in a variety of positions. The antenna has a low Return Loss and Cross-Pol Discrimination, making it suitable for a variety of communication networks. The PC11.09.0100A is a good choice for base stations, repeaters, broadcast systems, and microwave links.

The specific data is subject to PDF, and the above content is for reference