PC123S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators, also known as optocouplers or optical isolators, are integrated circuits designed to maintain an electrical insulation barrier between a target circuit and the control source. The internal circuitry of an optoisolator consists of a combination of a high-intensity light-emitting diode (LED) and a photo-sensitive device, with the photo-sensitive device typically including a phototransistor or a photoconductor. The light-emitting diode is driven by voltage from the control circuit, and the photodetector then sends a voltage back to the target control circuitry. This structure provides an electrical barrier between two circuits, thereby protecting from both high-voltage and low voltage surges.

The PC123S is an optoisolator that utilizes a transistor output photovoltaic device to isolate signals between two circuits. This type of optoisolator relies on light being emitted from the LED and sensed by the photodetector containing a photovoltaic collector-base junction of a transistor structure. Once the light from the LED is absorbed by the photodetector, the resulting small voltage change causes the base-collector junction of the photovoltaic phototransistor to turn on or off, depending on the intensity of the light.

The PC123S utilizes a dual-channel structure in order to provide channel-to-channel isolation, which protects the target signal from transients on one side while providing a fully-protected signal on the other side. The LED and photodetector channels are connected through a thin plastic film or thermoplastic insulation layer, providing isolation of up to 2500 Virtus between the LED and photodetector. As such, the PC123S provides electrical insulation in industrial automation, medical device, and data telemetry applications.

The PC123S offers superior performance and reliability compared to other opto-devices due to its advanced design techniques. The optoisolator is able to switch from on-to-off and off-to-on states at speeds up to 25 MHz, while consuming an average LED current of only 2.5 mA. Additionally, the PC123S offers a wide operating temperature range, from -40°C to +105°C, and a high dielectric strength of 4000 Voltron’s (Vrms), making it suitable for a variety of industrial environments.

The PC123S optoisolator is ideal for applications such as motor drive systems in industrial automation, medical diagnostic equipment, and data and communication systems. The optoisolator can be used to isolate signals in these systems, while providing an electrical barrier between the circuit and the control circuitry, thus protecting the circuit from potential electrical faults. The optoisolator can also be used to provide a logic level signal when interfacing home automation systems to industrial grade sensing and control systems.

The PC123S is an excellent choice for those who require rapid switching at a very low LED current. Not only is the optoisolator efficient, it is also extremely reliable in harsh industrial environments. Thanks to its high dielectric strength of 4000 Vrms, the PC123S is able to operate reliably in a variety of temperatures, making it highly suitable for a variety of industrial applications.

The specific data is subject to PDF, and the above content is for reference