PC357N3J000F Isolators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are used in a variety of applications to provide electrical isolation between circuits. One type, the transistor, photovoltaic output optoisolator, is able to convert an optically transmitted signal into an electrical signal. The PC357N3J000F optoisolator is one such device, used for various applications. This article provides an overview of the PC357N3J000F optoisolator, including its application field and working principle.

Applications of the PC357N3J000F Optoisolator

The PC357N3J000F is a transistor, photovoltaic output optoisolator that is well-suited for signal transmission applications where the electrical isolation between circuits must be maintained. It is also used in electricity-sensitive areas where electrical contact must be avoided. Some common applications of the PC357N3J000F include:

• Communication applications, such as data transmission, remote control, optical switches, and current or voltage measurements
• Industrial instrumentation, such as temperature controllers and motor speed control
• Microprocessor systems, such as programmable controllers and embedded systems
• House-hold appliances, such as microwave ovens, televisions, and air conditioners

Features of the PC357N3J000F Optoisolator

The PC357N3J000F optoisolator has several beneficial features and it should be noted that different products may feature different specifications. The following provides a summary of the features of this optoisolator.

• Low input current (10 mA max.)
• Low ON-state output current (1.0 mA max.)
• Low collector-emitter breakdown voltage (20 V max.)
• Low output saturation voltage (2.0 V max.)
• High isolation voltage (1000 Vrms)
• Low optical input sensitivity (50 mW/mΩ)

Working Principle of the PC357N3J000F Optoisolator

The PC357N3J000F optoisolator consists of a gallium arsenide infrared-emitting diode (IRED) and a silicon NPN transistor integrated in one package. The IRED emits infrared rays when a DC voltage is applied to the anode. These infrared rays are then received by the silicon NPN photocoupler, which causes a small current to flow in the transistor\'s base. This in turn causes the transistor\'s collector current to flow, which results in the output becoming “on” (high state). When the IRED is not emitting light, the transistor\'s collector current is cut-off, and the output “off” (low state).

Conclusion

The PC357N3J000F optoisolator is a versatile device that is used for a variety of signal transmission applications where electrical isolation between circuits must be maintained. Its features, such as low input current, low output saturation voltage, and high isolation voltage are beneficial for these applications. The optoisolator works by converting an optically transmitted signal into an electrical signal, allowing it to effectively isolate the signal from the circuit.

The specific data is subject to PDF, and the above content is for reference