PC357T13J00F Isolators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic devices that are used to provide the electric isolation between two circuits. They provide the isolation by integrating an optoelectronic device, such as a light-emitting diode (LED), and an electrical device, such as a phototransistor or photoresistor, together. Optoisolators can be divided into two main categories based on the electrical device used: transistor output optoisolators and photovoltaic output optoisolators. The PC357T13J00F optoisolator belongs to the transistor output optoisolator category.

The PC357T13J00F is a 6-pin, 4.6 mm × 2.3 mm single-channel phototransistor output optoisolator. It features a high isolation voltage of 5,500 V rms for 1 minute and high temperature performance ratings of up to 105 °C. It is also RoHS compliant and offers a built-in amplifier for increased signal strength and reliability. It is suitable for a range of applications such as motor control, LED interfacing, relay driving, and more.

The working principle of the phototransistor optoisolator is quite simple. It consists of a light source, typically an LED, and a photo-sensing element typically a phototransistor. When a voltage is applied to the inputs of the optoisolator, it causes the LED to emit light. The light is then detected by the phototransistor, which in turn will output a current. This current can then be used to actuate a relay or other device. The photons absorbed by the phototransistor also cause a voltage drop across it, which makes it act as a resistor. Therefore, the optoisolator acts as an electrically isolated switch, effectively isolating the two circuits that are connected to it.

In conclusion, the PC357T13J00F optoisolator is a single-channel phototransistor output optoisolator that is used for providing electric isolation between two circuits. It has a high isolation voltage rating and a high temperature performance rating, making it suitable for a wide range of applications. It works by using a LEDs as a light source which is detected by a phototransistor, causing it to output a current which can be used to actuate a relay or other device. The voltage drop across the phototransistor also causes it to act as a resistor, effectively isolating the two circuits that are connected to it.

The specific data is subject to PDF, and the above content is for reference